Compositional and Thermal Evaluation of Lignocellulosic and Poultry Litter Chars via High and Low Temperature Pyrolysis High and Low Temperature Pyrolyzed Biochars

• Published in: Bioenergy research Vol. 6; no. 1; pp. 114 - 130
• Main Authors: Novak, J. M., Cantrell, K. B., Watts, D. W.
• Format: Journal Article
• Language: English
• Published: New York Springer-Verlag 01-03-2013
• Subjects: Arachis hypogaea; Ashes; Biomedical and Life Sciences; Chars; Combustion; Feedstock; Life Sciences; Litter; Plant Breeding/Biotechnology; Plant Ecology; Plant Genetics and Genomics; Plant Sciences; Poultry; Pyrolysis; Thermal energy; Wood Science & Technology; Energy content; Bioenergy; GRACEnet; Nuclear magnetic resonance; Thermogravimetric analysis
• ISSN: 1939-1234; 1939-1242
• DOI: 10.1007/s12155-012-9228-9

Inorganic elements in biomass feedstocks can influence thermochemical reactions as well as the resultant char’s elemental, compositional, and thermal characteristics. Chars were produced using slow pyrolysis under low (≤400°C) and high (≥500°C) temperature regimes from sugarcane bagasse, peanut hulls, pecan shell, pine chips, poultry litter, and switchgrass. The chars and raw feedstocks were characterized for their elemental, structural, and thermal properties to ascertain the implications of feedstock selection and pyrolysis temperatures on these properties. Char mass yields from the six feedstocks ranged between 28% and 78% by weight while carbon yields ranged between 44% and 89%. In both instances, lower yields were obtained with increasing pyrolysis temperature. Higher pyrolysis temperatures (≥500°C) resulted in more neutral to alkaline chars possessing greater ash contents and increased aromatic character with narrow O/C and H/C ratios. A significant exponential curve response (
r
2
 = 0.87,
P
 < 0.001) was revealed between char mass yields vs. pyrolysis temperature. All raw feedstocks and chars contained mixed amounts of macro-, micro-, and trace element concentrations. The higher heating values (HHV) tended to increase with heightened pyrolysis temperature with some chars producing >30 MJ kg
−1
. The chars’ HHV values inversely correlated to their total ash and Cl content. Lignocelluloses chars had better thermal characteristics and lower ash quality concerns implying suitable service in thermal energy production. In contrast, poultry litter char had greater ash contents, medium HHV values, and contained corrosive inorganic elements, which rendered it problematic as a feedstock for thermal energy generation.