Coprecipitation Synthesis of Large-Pore-Volume γ‑Alumina Nanofibers by Two Serial Membrane Dispersion Microreactors with a Circulating Continuous Phase

• Published in: Industrial & engineering chemistry research Vol. 62; no. 3; pp. 1415 - 1424
• Main Authors: Yu, Zhiyuan, Guo, Chengyu, Pang, Xinmei, Shen, Yuge, Gao, Mingtang, Zhao, Shenyuan, Wang, Yujun, Luo, Guangsheng
• Format: Journal Article
• Language: English
• Published: American Chemical Society 25-01-2023
• Subjects: Materials and Interfaces
• ISSN: 0888-5885; 1520-5045
• DOI: 10.1021/acs.iecr.2c03920

A coprecipitation method was developed for the synthesis of fibrous γ-alumina using serial membrane dispersion microreactors with a circulating continuous phase and high concentrations of NaAlO2 and Al2(SO4)3 as reactants. Owing to the ultra-high mixing intensity and reduction of supersaturation due to the large circular phase ratio, a large pore volume and specific surface area and an extremely narrow pore diameter distribution were realized using the high-concentration and high-viscosity precipitation system. The influence of the phase ratio, dispersion order of reactants, Al2(SO4)3 residence time, and the precipitation reaction pH and time were investigated, and the nanofiber formation mechanism was explored employing theoretical calculations. By controlling the Al2(SO4)3 residence time of 3 s, phase ratio of 16, and pH of 8.0, γ-Al2O3 nanofibers with a pore volume of 1.36 cm3/g, a specific surface area of 376 m2/g, and a length/diameter ratio in the range of 30–54 were obtained without any organic reagents. This study provides an economical and readily scalable method for the synthesis of fibrous γ-Al2O3 with excellent pore properties and a large specific surface area, which can potentially be applied as an excellent catalyst support for diesel and bio-oil hydrogenation.