Rotatable magnetron sputtering of YBa sub(2)Cu sub(3)O sub(7-x) thin films on single crystal substrates

• Published in: Physica. C, Superconductivity Vol. 372-376; pp. 1067 - 1070
• Main Authors: De Winter, G, Van Paemel, R, De Gryse, R, Denul, J, Van Driessche, I, Bruneel, E, Hoste, S, Georgiopoulos, E, Andreouli, C, Tsetsekou, A, De Roeck, Ilse
• Format: Journal Article
• Language: English
• Published: 01-08-2002
• ISSN: 0921-4534

The development of sputter deposition of YBa sub(2)Cu sub(3)O sub(7-x) (YBCO) from rotatable targets is an important step in the realisation of a large scale deposition process for YBCO coated conductor. Rotatable magnetron sputter sources are standard equipment in large scale sputter industry and the power input in a rotatable magnetron can be much higher compared to a planar magnetron with the same race track area. This result in improved discharge characteristics and increased deposition speed. For this work a flame sprayed and a plasma sprayed cylindrical YBCO target was used to deposit YBCO thin films on single crystal MgO. c-Axis oriented YBCO thin films were obtained at lower pressure than is normally used for YBCO sputter deposition, resulting in a higher deposition speed. The influence of deposition parameters (such as sputter pressure, oxygen partial pressure, substrate temperature, etc.) on the properties of the YBCO layer was investigated and the possibilities for large scale deposition were explored. copyright 2002 Elsevier Science B.V. All rights reserved.