Design and Analysis of a Low-Power Readout Circuit for CdZnTe Detectors in 0.13-[Formula Omitted] CMOS

In this paper, the design of a low-power low-noise readout circuit for cadmium zinc telluride (CdZnTe or CZT) detectors is presented. Such sensors are used in a variety of applications, including medical imaging, security, and astrophysics. The readout circuit includes a charge-sensitive amplifier (...

Full description

Saved in:
Bibliographic Details
Published in:IEEE sensors journal Vol. 16; no. 4; p. 903
Main Authors: Beikahmadi, Mohammad, Mirabbasi, Shahriar, Iniewski, Krzysztof Kris
Format: Journal Article
Language:English
Published: New York The Institute of Electrical and Electronics Engineers, Inc. (IEEE) 01-01-2016
Subjects:
Online Access:Get full text
Tags: Add Tag
No Tags, Be the first to tag this record!
Description
Summary:In this paper, the design of a low-power low-noise readout circuit for cadmium zinc telluride (CdZnTe or CZT) detectors is presented. Such sensors are used in a variety of applications, including medical imaging, security, and astrophysics. The readout circuit includes a charge-sensitive amplifier (CSA), a reset network to accommodate the leakage current of the detector, and a first-order pulse shaper with a pole-zero cancellation circuit. The CSA has two gain settings for 0-5- and 5-45-fC injected charge, and the pulse shaper is designed to provide four different shaping times. The discharge time constant of the CSA can also be adjusted to accommodate various event rates. Furthermore, a comprehensive noise analysis of the readout system is presented. To facilitate the noise analysis, the equivalent noise charge (ENC) equations are derived analytically. The optimization of the noise performance of the front-end circuit is also discussed. The application-specific integrated circuit is fabricated in a 0.13-[Formula Omitted] CMOS process. For a detector capacitance of 250 fF, the measured ENC varies from 66 to 101 [Formula Omitted]-rms depending on the peaking time. The measured power consumption of the readout circuit is just under 1 mW from a 1.2 V supply.
ISSN:1530-437X
1558-1748
DOI:10.1109/JSEN.2015.2495228