Effect of sintering temperature and the particle size on the structural and magnetic properties of nanocrystalline Li sub(0.5Fe) sub(2).5O sub(4)

• Published in: Journal of magnetism and magnetic materials Vol. 323; no. 23; pp. 3104 - 3108
• Main Authors: Shirsath, Sagar E, Kadam, R H, Gaikwad, Anil S, Ghasemi, Ali, Morisako, Akimitsu
• Format: Journal Article
• Language: English
• Published: 01-12-2011
• Subjects: Hematite; Lithium ferrite; Magnetic properties; Order disorder; Particle size; Phases; Sintering; Spinel
• DOI: 10.1016/j.jmmm.2011.06.065
• ISSN: 0304-8853

Sintering temperature and particle size dependent structural and magnetic properties of lithium ferrite (Li sub(0.5Fe) sub(2).5O sub(4) were synthesized and sintered at four different temperatures ranging from 875 to 1475 K in the step of 200 K. The sample sintered at 875 K was also treated for four different sintering times ranging from 4 to 16 h. Samples sintered at 1475 K have the cubic spinel structure with a small amount of alpha -Fe) sub(2)O sub(3 (hematite) and gamma -Fe) sub(2)O sub(3 (maghemite). The samples sintered at=1275 K do not show hematite and maghemite phases and the crystals form the single phase spinel structure with the cation ordering on octahedral sites. Particle size of lithium ferrite is in the range of 13-45 nm, and is depend on the sintering temperature and sintering time. The saturation magnetization increased from 45 to 76 emu/g and coercivity decreases from 151 to 139 Oe with an increase in particle size. Magnetization temperature curve recorded in ZFC and FC modes in an external magnetic field of 100 Oe. Typical blocking effects are observed below about 244 K. The dielectric constant increases with an increase in sintering temperature and particle size.)