Corrosion of Au-Pd-In alloy in simulated physiological solutions

• Published in: Journal of applied electrochemistry Vol. 31; no. 10; pp. 1079 - 1087
• Main Authors: LEINARTAS, K, MIECINSKAS, P, SUDAVICIUS, A, JELINSKIENE, D, JUSKENAS, R, LISAUSKAS, V, VENGALIS, B, JUZELIUNAS, E
• Format: Journal Article
• Language: English
• Published: Heidelberg Springer 01-10-2001
• Subjects: Applied sciences; Corrosion; Corrosion mechanisms; Exact sciences and technology; Metals. Metallurgy; Physiological condition; Ternary alloy; Indium Alloys; Magnetron; Electrochemical method; Palladium Alloys; X ray; X ray diffraction; Dental alloy; Corrosion; Gold Alloys; Photoelectron spectrometry; Lactic acid; Saliva; Quartz microbalance; Sodium Chlorides
• ISSN: 0021-891X; 1572-8838
• DOI: 10.1023/A:1012280108270

The corrosion of Au-Pd-In alloy, which is of great importance in dentistry, has been studied using an electrochemical quartz crystal microbalance (EQCM) in simulated physiological solutions. The alloy was deposited on quartz substrates by means of magnetron sputtering (MS). Analysis performed using X-ray photoelectron spectroscopy showed that the chemical composition of the sputtered deposit was similar to that of the MS target made of conventional casting alloy. Investigations by X-ray diffraction indicated a crystalline structure of the MS alloy. The electrochemical and corrosion behaviour of the Au-Pd-In alloy was studied in three simulated physiological solutions: 0.9 M NaCl, 0.1 M NaCl + 0.1 M lactic acid and artificial saliva. Determination of break down potential was complicated by the anodic gold dissolution due to formation of a chloride complex. The onset of anodic currents, therefore, indicated not the potential at which the passive layer starts to be destroyed, but the exceeding of the Au/AuCl sub 4 exp - equilibrium potential, which does not directly reflect corrosion resistance. The EQCM measurements under open circuit conditions indicated corrosion as an increase in mass, caused by the accumulation of corrosion products on the alloy surface. The increase in mass in acidic solution (pH 2.2) was similar to that in neutral solution (pH 6.5), which implies dissolution of corrosion products to be insignificant.