Extrusion of poly(ether imide) foams using pressurized CO2: Effects of imposition of supercritical conditions and nanosilica modifiers

• Published in: Polymer engineering and science Vol. 54; no. 9; pp. 2064 - 2074
• Main Authors: Aktas, Seda, Gevgilili, Halil, Kucuk, Ilknur, Sunol, Aydin, Kalyon, Dilhan M.
• Format: Journal Article
• Language: English
• Published: Hoboken, NJ Blackwell Publishing Ltd 01-09-2014; Wiley
• Subjects: Applied sciences; Cellular; Composites; Exact sciences and technology; Forms of application and semi-finished materials; Polymer industry, paints, wood; Technology of polymers; Cell structure; Viscoelasticity; Carbon dioxide; Blowing agent; Experimental study; Cellular plastic; Property processing relationship; Density; Silica; Composite material; Structure processing relationship; Foaming process; Morphology; Extrusion; Single screw extruder; Plastics; Etherimide polymer; Rheological properties
• ISSN: 0032-3888; 1548-2634
• DOI: 10.1002/pen.23753

Foams of an engineering plastic, poly(ether imide), were extruded using a single screw extruder employing pressurized CO2 as the blowing agent. The porosity, pore size distributions, and the density of the foams were especially affected by the pressure drop, the pressure loss rate, and temperature at the die. Significant increases in porosity and pore size and corresponding decreases in density were observed when the pressure imposed on CO2 became greater than the critical pressure values of CO2 (i.e., the temperature was always greater than the critical temperature of the CO2 in the extruder and the die). The viscoelastic material functions of the extruded foams depended especially on the density of the foam, with the elastic modulus increasing with density. The incorporation of nanosilica particles in the 0.08–0.6% by weight range increased only the density of the foam and did not provide any benefits in controlling of the nucleation rate and the pore size distribution, presumably due to their poor dispersibility and agglomerated state in the single screw extruder. POLYM. ENG. SCI., 54:2064–2074, 2014. © 2013 Society of Plastics Engineers