A New Validated Potentiometric Method for Sulfite Assay in Beverages Using Cobalt(II) Phthalocyanine as a Sensory Recognition Element

• Published in: Molecules (Basel, Switzerland) Vol. 25; no. 13; p. 3076
• Main Authors: Hassan, Saad S M, H Kamel, Ayman, Amr, Abd El-Galil E, Abd-Rabboh, Hisham S M, Al-Omar, Mohamed A, Elsayed, Elsayed A
• Format: Journal Article
• Language: English
• Published: Switzerland MDPI AG 06-07-2020; MDPI
• Subjects: Additives; Ammonium; Ammonium chloride; Anions; Assaying; Beverage industry; Beverages; Beverages - analysis; Calibration; Catalytic oxidation; Chemistry Techniques, Analytical - methods; Chromatography; Cobalt; Discriminators; Ethers - chemistry; flow injection analysis; Food; Hydrodynamics; Hydrogen-Ion Concentration; Indoles - chemistry; Inspection; Life span; Limit of Detection; Membranes; Membranes, Artificial; method validation; Methods; Organometallic Compounds - chemistry; Plasticizers - chemistry; Polyvinyl chloride; potentiometry; Potentiometry - methods; Pretreatment; Quality assurance; Quality control; Quaternary Ammonium Compounds - chemistry; Recognition; Reproducibility of Results; Selectivity; Sensors; Sulfite; sulfite measurements; sulfite sensor; Sulfites - analysis; Sulfites - chemistry; flow injection analysis; method validation; sulfite sensor; beverages; potentiometry; sulfite measurements
• ISSN: 1420-3049; 1420-3049
• DOI: 10.3390/molecules25133076

A simple potentiometric sensor is described for accurate, precise, and rapid determination of sulfite additives in beverages. The sensor is based on the use of cobalt phthalocyanine as a recognition material, dispersed in a plasticized poly(vinyl chloride) matrix membrane.
-Nitrophenyl octyl ether (
-NPOE) as a membrane solvent and tri-dodecylmethyl- ammonium chloride (TDMAC) as ion discriminators are used as membrane additives. Under the optimized conditions, sulfite ion is accurately and precisely measured under batch and flow injection modes of analysis. The sensor exhibits fast and linear response for 1.0 × 10
-1.0 × 10
M (800-0.08 µg/mL) and 1.0 × 10
-5.0 × 10
M (8000-4 µg/mL) sulfite with Nernstian slopes of -27.4 ± 0.3 and -23.7 ± 0.6 mV/concentration decade under static and hydrodynamic modes of operation, respectively. Results in good agreement with the standard iodometric method are obtained.Validation of the assay method is examined in details including precision, accuracy, bias, trueness, repeatability, reproducibility, and uncertainty and good performance characteristics of the method are obtained. The sensor response is stable over the pH range of 5 to 7 without any significant interference from most common anions. The advantages offered by the proposed sensor (i.e., wide range of assay, high accuracy and precision, low detection limit, reasonable selectivity, long term response stability, fast response, and long life span and absence of any sample pretreatment steps) suggest its use in the quality control/quality assurance routine tests in beverages industries, toxicological laboratories and by inspection authorities.