Dermal transfer and environmental release of CeO2 nanoparticles used as UV inhibitors on outdoor surfaces: Implications for human and environmental health

• Published in: The Science of the total environment Vol. 613-614; no. C; pp. 714 - 723
• Main Authors: Clar, Justin G., Platten, William E., Baumann, Eric J., Remsen, Andrew, Harmon, Steve M., Bennett-Stamper, Christina L., Thomas, Treye A., Luxton, Todd P.
• Format: Journal Article
• Language: English
• Published: Netherlands Elsevier B.V 01-02-2018; Elsevier
• Subjects: Ceria; Exposure; Nano-enabled; Nanomaterial; Surface coating; XAFS; Exposure; Surface coating; Nanomaterial; XAFS; Ceria; Nano-enabled
• DOI: 10.1016/j.scitotenv.2017.09.050
• EISSN: 1879-1026
• ISSN: 0048-9697

A major area of growth for “nano-enabled” consumer products have been surface coatings, including paints stains and sealants. Ceria (CeO2) nanoparticles (NPs) are of interest as they have been used as additives in these these products to increase UV resistance. Currently, there is a lack of detailed information on the potential release, and speciation (i.e., ion vs. particle) of CeO2 NPs used in consumer-available surface coatings during intended use scenarios. In this study, both Micronized-Copper Azole pressure-treated lumber (MCA), and a commercially available composite decking were coated with CeO2 NPs dispersed in Milli-Q water or wood stain. Coated surfaces were divided into two groups. The first was placed outdoors to undergo environmental weathering, while the second was placed indoors to act as experimental controls. Both weathered surfaces and controls were sampled over a period of 6months via simulated dermal contact using methods developed by the Consumer Product Safety Commission (CPSC). The size and speciation of material released was determined through sequential filtration, total metals analysis, X-Ray Absorption Fine Structure Spectroscopy, and electron microscopy. The total ceria release from MCA coated surfaces was found to be dependent on dispersion matrix with aqueous applications releasing greater quantities of CeO2 than stain based applications, 66±12mg/m2 and 36±7mg/m2, respectively. Additionally, a substantial quantity of CeO2 was reduced to Ce(III), present as Ce(III)-organic complexes, over the 6-month experimental period in aqueous based applications.
[Display omitted]
•CeO2 nanoparticles have been proposed as surface coatings for UV protection.•Release/transformation of CeO2 tracked with simulated dermal contact & leaching.•Application matrix dramatically effects CeO2 release characteristics.•Reduction of Ce(IV) to Ce(III) observed during outdoor exposure and weathering.•Number of contact events governs CeO2 release during simulated dermal contact.