NiFe Alloy Nanoparticles Tuning the Structure, Magnetism, and Application for Oxygen Evolution Reaction Catalysis

• Published in: Magnetochemistry Vol. 9; no. 8; p. 201
• Main Authors: Raimundo, Rafael A, Silva, Vinícius D, Ferreira, Luciena S, Loureiro, Francisco J. A, Fagg, Duncan P, Macedo, Daniel A, Gomes, Uílame U, Soares, Márcio M, Gomes, Rodinei M, Morales, Marco A
• Format: Journal Article
• Language: English
• Published: Basel MDPI AG 01-08-2023
• Subjects: Alloys; Analysis; Body centered cubic lattice; Catalysis; Crystal structure; Energy; Face centered cubic lattice; Ferromagnetism; Heat treatment; Intermetallic compounds; Iron; Iron alloys; Iron compounds; Magnetic measurement; Magnetic properties; Mechanical properties; Morphology; Mossbauer spectroscopy; Mössbauer spectroscopy; Nanoalloys; Nanomaterials; Nanoparticles; Nickel; Nickel alloys; Nickel base alloys; Nickel compounds; nickel–iron alloy; Nitrates; oxygen evolution reaction; Oxygen evolution reactions; Permeability; Powder metallurgy; Reduction; Software; Sol-gel processes; Spectrum analysis; Structure; Temperature; Brazil; United States > US; Japan
• ISSN: 2312-7481; 2312-7481
• DOI: 10.3390/magnetochemistry9080201

In this study, Ni-Fe alloy nanoparticles were prepared using the proteic sol–gel method, followed by a reduction in H2 at 500 and 700 °C, namely hereafter as NiFe-500 and NiFe-700, respectively. The morphological, structural, and magnetic properties were tuned via the thermal treatment in H2. The samples were studied using XPS, TEM, Mössbauer spectroscopy, DC magnetic measurements, and electrochemical measurements. Ritveld refinements showed that the sample NiFe-500 has FCC (face-centered cubic) and BCC (body-centered cubic) NiFe alloys, while the sample NiFe-700 has only FCC NiFe alloy. For both samples, magnetization measurements in the range of 300–900 K showed the presence of the Griffiths phase, indicating the formation of clusters of either Fe or Ni-Fe alloys rich in Fe. The sample NiFe-500 presented ferromagnetic (FM) transitions at 533, 700, and 834 K, assigned to the alloys Ni37Fe63-FCC, Ni46Fe54-FCC, and Ni55Fe45-FCC, respectively. In contrast, we could not observe the FM transition of the BCC Ni-Fe alloy because of limitations in our experimental setup (T ≤ 900 K). Meanwhile, three FM transitions were observed for the sample NiFe-700 at 480, 655, and 825 K, attributed to the alloys Ni34Fe66-FCC, Ni43Fe57-FCC, and Ni54Fe46-FCC, respectively. At 5 K, the samples NiFe-500 and NiFe-700 have saturation magnetizations of 164.2 and 173.6 emu g−1, respectively. For application in Oxygen Evolution Reaction catalysis, the samples NiFe-500 and NiFe-700 showed different overpotentials of 319 and 307 mV at 10 mA cm−2. These low overpotential values indicate a higher electrochemical activity of the FCC Ni-Fe alloy and, for both samples, a superior electrocatalytic activity in comparison to RuO2 e IrO2 conventional catalysts. Furthermore, the samples showed high electrochemical stability in chrono potentiometric studies for up to 15 h. This current work highlights that the Ni-Fe alloys produced via the proteic sol–gel and with a reduction in H2 methods can be promising for OER systems due to their good performance and low costs.