Imaging diagnostics study on obliquely impacting plasma-sprayed particles near to the substrate

• Published in: Journal of thermal spray technology Vol. 15; no. 1; pp. 118 - 130
• Main Authors: KANG, C. W, NG, H. W, YU, S. C. M
• Format: Journal Article
• Language: English
• Published: Heidelberg Springer 01-03-2006; Springer Nature B.V
• Subjects: Adhesion; Applied sciences; Average velocity; Curvature; Diagnostic systems; Exact sciences and technology; Imaging; Metals. Metallurgy; Production techniques; Quantitative analysis; Sprayers; Sprays; Substrates; Surface treatment; Plasma; Imaging; Hot spraying; imaging diagnostics; SprayWatch system; inclined substrate; particle parameters; Plasma spraying; Surface treatment
• ISSN: 1059-9630; 1544-1016
• DOI: 10.1361/105996306x92686

Real time close-up images of in-flight particles plasma sprayed onto a substrate and in freestream condition (without substrate present) are captured. Besides the images, particle behavior in terms of temperature, velocity, and heading are measured by the Spray Watch particle imaging diagnostics system. The monitoring and measurement of particle behavior have been performed for substrates inclined at various angles to investigate the effect of the substrate on particle behavior. The close-up images show that particles propelled from the torch travel with high momentum and are not affected by the substrate and inclination angle. Quantitative analyses of the particle average velocity and heading data with and without the different inclined substrates also lead to similar conclusions. The particle velocity is resolved into tangential and normal velocity components parallel and perpendicular to the substrate, respectively. The tangential velocity component controls the degree of splat elongation into elliptical shape from the circular shape seen in perpendicular impact. This is of practical importance in industrial spraying of engineering components of complex curvatures. A higher tangential velocity component also implies that more powders are lost through rebounding and overspraying and thus reducing the deposition efficiency. The normal velocity component decreases when substrate inclination increases, which tends to weaken the coating adherence.