Frequency domain analysis of pre-stressed elastomeric vibration isolators

• Published in: Defence technology Vol. 25; pp. 33 - 47
• Main Authors: Somanath, S., Marimuthu, R., Krishnapillai, Shankar
• Format: Journal Article
• Language: English
• Published: Elsevier B.V 01-07-2023; KeAi Communications Co., Ltd
• Subjects: Axi-symmetric; Complex modulus; Elastomer; Frequency; Isolator; Random; Response; Strain amplitude; Transmissibility; Response; Isolator; Transmissibility; Random; Axi-symmetric; Complex modulus; Elastomer; Frequency; Strain amplitude
• ISSN: 2214-9147; 2214-9147
• DOI: 10.1016/j.dt.2022.10.004

Two types of elastomeric vibration isolators used for equipment vibration isolation in aerospace vehicles are considered for the present study. These isolators are constructed using elastomers mounted in steel encasings. These isolators are initially deformed statically and dynamic loads are applied on the deformed configuration. To capture the static deformation, equivalent static load corresponding to its load rating and specified displacements are created. Static deformation is computed using Finite Element methods with four node axi-symmetric element which include the geometric non-linear effect for steel and with standard Yeoh hyper-elastic material model for elastomers (Muhammed and Zu, 2012) [1]. Yeoh material constants are derived from uni-axial tension test data of the elastomer specimen. These isolators are subjected to harmonic and random excitations in the pre-deformed state. For numerical analysis, elastomeric constants at dynamic conditions are obtained as complex function of frequency using Dynamic Mechanical Analyzer (DMA) for a range of frequencies. The standard material model of Yeoh is modified incorporating frequency dependant material characteristics and damping in the range of frequencies of interest. A multiplicative non-separable variables law is derived for Yeoh material model to include the effect of static pre-stress, based on the methodology given in literature (Nashif et al., 1985; Beda et al., 2014) [2,3]. The modifications of Yeoh model suitable for frequency domain analysis is the novelty in the present study. In the analysis, while dynamic loads are applied, the configuration is updated considering initial static loading. The frequency response of the isolators is computed using material properties evaluated at progressive dynamic strains until a match in natural frequency is observed. Appropriate damping corrections are then incorporated to match the test observed transmissibility. Then updated material properties are used to compute the random response which showed good agreement with results of experiments, validating the approach taken for the development of this model.