Characterization of elevated temperature properties of heat exchanger and steam generator alloys

• Published in: Nuclear engineering and design Vol. 251; pp. 252 - 260
• Main Authors: Wright, J.K., Carroll, L.J., Cabet, C., Lillo, T.M., Benz, J.K., Simpson, J.A., Lloyd, W.R., Chapman, J.A., Wright, R.N.
• Format: Journal Article
• Language: English
• Published: United States Elsevier B.V 01-10-2012
• Subjects: Allopy 800H; Alloy 617; ALLOYS; CREEP; Dynamic strain aging; FATIGUE; Ferrous alloys; HEAT EXCHANGERS; High temperature; INCOLOY 800H; INCONEL 617; intermediate heat exchanger; MATERIALS SCIENCE; Nickel base alloys; NUCLEAR FUEL CYCLE AND FUEL MATERIALS; Nuclear reactor components; Outlets; SOLID SOLUTIONS; steam generator; STEAM GENERATORS; STRAIN AGING; STRAIN RATE; Superalloys; TEMPERATURE RANGE 0400-1000 K
• ISSN: 0029-5493; 1872-759X
• DOI: 10.1016/j.nucengdes.2011.10.034

The Next Generation Nuclear Plant project is considering Alloy 800H and Alloy 617 for steam generator and intermediate heat exchangers. It is envisioned that a steam generator would operate with reactor outlet temperatures from 750 to 800°C, while an intermediate heat exchanger for primary to secondary helium would operate up to an outlet temperature of 950°C. Although both alloys are of interest due in part to their technical maturity, a number of specific properties require further characterization for design of nuclear components. Strain rate sensitivity of both alloys has been characterized and is found to be significant above 600°C. Both alloys also exhibit dynamic strain aging, characterized by serrated flow, over a wide range of temperatures and strain rates. High temperature tensile testing of Alloy 617 and Alloy 800H has been conducted over a range of temperatures. Dynamic strain aging is a concern for these materials since it is observed to result in reduced ductility for many solid solution alloys. Creep, fatigue, and creep–fatigue properties of Alloy 617 have been measured as well, with the goal of determining the influence of the temperature, strain rate and atmosphere on the creep–fatigue life of Alloy 617. Elevated temperature properties and implications for codification of the alloys will be described.