Sulfate Resistance in Cements Bearing Ornamental Granite Industry Sludge

• Published in: Materials Vol. 13; no. 18; p. 4081
• Main Authors: Medina, Gabriel, Sáez del Bosque, Isabel F., Frías, Moisés, Sánchez de Rojas, María Isabel, Medina, César
• Format: Journal Article
• Language: English
• Published: MDPI 14-09-2020; MDPI AG
• Subjects: binary cements; durability; granite dust; sulfate
• ISSN: 1996-1944; 1996-1944
• DOI: 10.3390/ma13184081

This study explores the effect on sulfate resistance of the use of ornamental granite industry waste as a supplementary cementitious material (at replacement ratios of 10% and 20%) in cement manufacture. The present paucity of scientific knowledge of the behaviour of these new cements when exposed to an external source of sulfates justifies the need for, and the originality of, this research. After characterising the waste chemically and mineralogically, cement paste specimens were prepared in order to determine the durability of the newly designed eco-cements using Köch–Steinegger corrosion indices. The new hydration products, which might induce microstructural, mineralogical, or morphological decay in the specimens, were also analysed by comparing the samples before and after soaking in a sodium sulfate solution for different test periods. Respect to the results, the damage to pastes bearing 10% granite sludge (GS) is the same as observed in OPC, whilst the former exhibit a higher Köch-Steinegger corrosion rate (1.61) than both OPC and OPC+20GS. Soaking the pastes in sodium sulfate induces matrix densification due to ettringite formation and gypsum precipitation in the pores. Further to those results, at an optimal replacement ratio of 10%, these alternative, eco-friendlier materials can be used in the design and construction of non-structural cement-based (mortar or concrete) members exposed to an external source of sulfate.