Secondary Al-Si-Mg High-pressure Die Casting Alloys with Enhanced Ductility

• Published in: Metallurgical and materials transactions. A, Physical metallurgy and materials science Vol. 46; no. 3; pp. 1035 - 1045
• Main Authors: Bösch, Dominik, Pogatscher, Stefan, Hummel, Marc, Fragner, Werner, Uggowitzer, Peter J., Göken, Mathias, Höppel, Heinz Werner
• Format: Journal Article
• Language: English
• Published: Boston Springer US 01-03-2015; Springer Nature B.V
• Subjects: Alloys; Aluminum base alloys; Cast alloys; Characterization and Evaluation of Materials; Chemistry and Materials Science; Cooling rate; Die casting; Ductility; Fracture mechanics; Iron; Manganese; Materials Science; Mechanical properties; Metallic Materials; Metallurgy; Microstructure; Nanotechnology; Structural Materials; Surfaces and Interfaces; Thin Films; Sludge Formation; 3Si2 Phase; High Cool Rate; Uniform Elongation; Shot Sleeve
• ISSN: 1073-5623; 1543-1940
• DOI: 10.1007/s11661-014-2700-8

Al-Si-Mg-based secondary cast alloys are attractive candidates for thin-walled high-pressure die castings for applications in the transport industry. The present study investigates the effect of manganese additions at high cooling rates on microstructure, mechanical properties, and on the dominating fracture mechanisms of alloy AlSi10Mg with an elevated iron concentration. Systematic variations of the Mn content from 0.20 to 0.85 wt pct at a constant Fe content of 0.55 wt pct illustrate the key changes in type, phase fraction, and shape of the Fe-containing intermetallic phases, and the corresponding influence on the alloy’s ductility. For high-pressure die casting (HPDC), an optimal range of the Mn content between 0.40 and 0.60 wt pct, equivalent to a Mn/Fe ratio of approximately 1, has been identified. At these Mn and Fe contents, the high cooling rates obtained in HPDC result in the formation of fine and homogeneously distributed
α
-Al
15
(Fe,Mn)
3
Si
2
phase, and crack initiation is transferred from AlFeSi intermetallics to eutectic silicon. The study interprets the microstructure–property relationship in the light of thermodynamic calculations which reveal a significant increase in undercooling of the
α
-Al
15
(Fe,Mn)
3
Si
2
phase with increased Mn content. It concludes that the interdependence of the well-defined Mn/Fe ratio and the high cooling rate in HPDC can generate superior ductility in secondary AlSi10Mg cast alloys.