PS-PVD deposition of thermal barrier coatings

• Published in: Surface & coatings technology Vol. 237; pp. 51 - 55
• Main Authors: Goral, Marek, Kotowski, Slawomir, Nowotnik, Andrzej, Pytel, Maciej, Drajewicz, Marcin, Sieniawski, Jan
• Format: Journal Article Conference Proceeding
• Language: English
• Published: Amsterdam Elsevier B.V 25-12-2013; Elsevier
• Subjects: Applied sciences; Chemical vapor deposition; Coatings; Cross-disciplinary physics: materials science; rheology; Deposition; Electron-beam physical vapor deposition; Exact sciences and technology; Feed rate; Low pressure plasma spraying; LPPS hybrid; Materials science; Metals. Metallurgy; Nickel base alloys; Nonmetallic coatings; Physics; Plasma spray physical vapor deposition; Production techniques; PS-PVD; Superalloys; Surface treatment; Surface treatments; TBC; Thermal barrier coatings; Yttria stabilized zirconia; Zirconium; Plasma spray physical vapor deposition; Thermal barrier coatings; Low pressure plasma spraying; TBC; LPPS hybrid; PS-PVD; Plasma; Spray coatings; Hot spraying; Surface treatments; Non metal coating; Vapor deposition; Low pressure; Thermal barriers; Physical vapor deposition; Plasma arc spraying
• ISSN: 0257-8972; 1879-3347
• DOI: 10.1016/j.surfcoat.2013.09.028

In this study, the influence of the deposition parameters on the coating structure during the ‘quasi-PVD’ process was investigated. This type of coating could be deposited at powder feed rates between 10 and 20g/min using He/Ar plasma gasses. The microstructure of the ceramic coating obtained using these parameters is unique because the evaporation of the ceramic powder was not complete. The deposition was conducted by the LPPS-Hybrid system produced by Sulzer Metco. Rene 80 nickel superalloy was used as a base material. A Zr-modified aluminide coating deposited by the CVD (Chemical Deposition) method, and a MeCrAlY coating deposited by the APS (Air Plasma Spraying) method were used as bond coats. Metco 6700 yttria-stabilized zirconia powder was used as a coating material. An increase in the coating thickness was triggered by increasing the powder feed rate. The pressure inside the working chamber exercised a strong influence on the structure and thickness of the coatings. In coatings deposited under a pressure of 200Pa, unevaporated powder particles were observed along with a significantly lower thickness. The same effect was rendered by decreasing the power current of the plasma gun to 1800A. The PS-PVD method provides an alternative process to APS and EB-PVD (Electron Beam Physical Vapor Deposition) technologies.
•The PS-PVD process to be a promising technology for deposition of TBC•The microstructure called “quasi-PVD” was obtained.•PS-PVD allows producing columnar crystal structure.