Carbon-Nanodots modified glassy carbon electrode for the electroanalysis of selenium in water

• Published in: Results in Chemistry Vol. 4; p. 100394
• Main Authors: Idris, Azeez O, Orimolade, Benjamin O, Mafa, Potlako J., Kuvarega, Alex T., Feleni, Usisipho, Mamba, Bhekie B.
• Format: Journal Article
• Language: English
• Published: Elsevier B.V 01-01-2022; Elsevier
• Subjects: Carbon nanodots; Nanomaterials; Selenium; Sensor; Square wave voltammetry; Nanomaterials; Square wave voltammetry; Selenium; Carbon nanodots; Sensor
• ISSN: 2211-7156; 2211-7156
• DOI: 10.1016/j.rechem.2022.100394

[Display omitted]
•A facile approach was used for the synthesis of carbon nanodots.•The carbon nanodot was used to modify glassy carbon electrode for the detection of Se(IV) ions in water.•An enhancement in peak current was observed on modifying GCE with carbon nanodots.•The proposed sensor detected Se(IV) ions to a detection limit of 0.05 ppb.
We report a simple and cheaper method for the electrochemical detection of Se(IV) using carbon nanodots (CNDTs) prepared from oat. The carbon nanodots were synthesised by a green and facile approach and characterised using scanning electron microscopy, high-resolution transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction and Raman spectroscopy. The CNDT was used to fabricate an electrochemical sensor for the quantification of Se(IV) in water. The modification of the glassy carbon electrode (GCE) with carbon nanodots led to an increase in the electroactive surface area of the electrode, which enhances the redox current peak of [Fe(CN)6]3–/4– in comparison to the bare GCE. Using the square wave voltammetry, the detection limit and quantification limit of 0.05 and 0.167 ppb were obtained under the optimised parameters using deposition potential of −200 mV, 0.1 M HNO3 electrolyte, electrodeposition time of 60 s, and pH 1. The results further revealed that the GCE-CNDT was not susceptible to many interfering cations except Cu(II) and Pb(II) and Fe(II). The sensor fabrication involves a one-step electrode modification and was used to detect Se(IV) in a real water sample and the result obtained is in agreement with the inductively coupled plasma technique. Overall, the electrode offers a cheap, fast and sensitive way of detecting selenium in environmental matrices.