Analysis of powdered tungsten carbide hard-metal precursors and cemented compact tungsten carbides using laser-induced breakdown spectroscopy

• Published in: Spectrochimica acta. Part B: Atomic spectroscopy Vol. 62; no. 12; pp. 1567 - 1574
• Main Authors: Novotný, K., Staňková, A., Häkkänen, H., Korppi-Tommola, J., Otruba, V., Kanický, V.
• Format: Journal Article
• Language: English
• Published: Elsevier B.V 01-12-2007
• Subjects: Bulk analysis; Excimer laser; Laser-induced breakdown spectroscopy (LIBS); Nd:YAG laser; Tungsten carbide; Nd:YAG laser; Tungsten carbide; Excimer laser; Bulk analysis; Laser-induced breakdown spectroscopy (LIBS)
• ISSN: 0584-8547; 1873-3565
• DOI: 10.1016/j.sab.2007.10.020

Laser-induced breakdown spectroscopy (LIBS) has been applied to the direct analysis of powdered tungsten carbide hard-metal precursors and cemented tungsten carbides. The aim of this work was to examine the possibility of quantitative determination of the niobium, titanium, tantalum and cobalt. The investigated samples were in the form of pellets, pressed with and without binder (powdered silver) and in the form of cemented tungsten carbides. The pellets were prepared by pressing the powdered material in a hydraulic press. Cemented tungsten carbides were embedded in resin for easier manipulation.
Several lasers and detection systems were utilized. The Nd:YAG laser working at a basic wavelength of 1064 nm and fourth-harmonic frequency of 266 nm with a gated photomultiplier or ICCD detector HORIBA JY was used for the determination of niobium which was chosen as a model element. Different types of surrounding gases (air, He, Ar) were investigated for analysis. The ICCD detector DICAM PRO with Mechelle 7500 spectrometer with ArF laser (193 nm) and KrF laser (248 nm) were employed for the determination of niobium, titanium, tantalum and cobalt in samples under air atmosphere. Good calibration curves were obtained for Nb, Ti, and Ta (coefficients of determination
r
2
>
0.96). Acceptable calibration curves were acquired for the determination of cobalt (coefficient of determination
r
2
=
0.7994) but only for the cemented samples. In the case of powdered carbide precursors, the calibration for cobalt was found to be problematic.