Permeability model of sintered porous media: analysis and experiments

• Published in: Heat and mass transfer Vol. 53; no. 11; pp. 3277 - 3285
• Main Authors: Flórez Mera, Juan Pablo, Chiamulera, Maria E., Mantelli, Marcia B. H.
• Format: Journal Article
• Language: English
• Published: Berlin/Heidelberg Springer Berlin Heidelberg 01-11-2017; Springer Nature B.V
• Subjects: Atomizing; Computational fluid dynamics; Copper; Darcys law; Distilled water; Engineering; Engineering Thermodynamics; Fluid flow; Heat and Mass Transfer; Hydraulics; Image analysis; Industrial Chemistry/Chemical Engineering; Media; Navier-Stokes equations; Original; Permeability; Porosity; Porous materials; Porous media; Sintering (powder metallurgy); Thermodynamics
• ISSN: 0947-7411; 1432-1181
• DOI: 10.1007/s00231-017-2028-1

In this paper, the permeability of porous media fabricated from copper powder sintering process was modeled and measured, aiming the use of the porosity as input parameter for the prediction of the permeability of sintering porous media. An expression relating the powder particle mean diameter with the permeability was obtained, based on an elementary porous media cell, which is physically represented by a duct formed by the arrangement of spherical particles forming a simple or orthorhombic packing. A circular duct with variable section was used to model the fluid flow within the porous media, where the concept of the hydraulic diameter was applied. Thus, the porous is modeled as a converging–diverging duct. The electrical circuit analogy was employed to determine two hydraulic resistances of the cell: based on the Navier–Stokes equation and on the Darcy´s law. The hydraulic resistances are compared between themselves and an expression to determine the permeability as function of average particle diameter is obtained. The atomized copper powder was sifted to reduce the size dispersion of the particles. The porosities and permeabilities of sintered media fabricated from powders with particle mean diameters ranging from 20 to 200 microns were measured, by means of the image analysis method and using an experimental apparatus. The permeability data of a porous media, made of copper powder and saturated with distilled water, was used to compare with the permeability model. Permeability literature models, which considers that powder particles have the same diameter and include porosity data as input parameter, were compared with the present model and experimental data. This comparison showed to be quite good.