High speed tooltip FRF predictions of arbitrary tool-holder combinations based on operational spindle identification

• Published in: International journal of machine tools & manufacture Vol. 129; pp. 48 - 60
• Main Authors: Postel, M., Özsahin, O., Altintas, Y.
• Format: Journal Article
• Language: English
• Published: Elmsford Elsevier Ltd 01-06-2018; Elsevier BV
• Subjects: Accuracy; Chatter; Chatter stability; Coupling; Dynamic stability; Frequency response functions; Inverse receptance coupling; Inverse stability solution; Machine tool dynamics; Machine tools; Measurement; Milling (machining); Predictions; Stability lobes; Timoshenko beams; Tool holders; Validation studies; Vibration; Inverse receptance coupling; Machine tool dynamics; Chatter stability; Inverse stability solution
• ISSN: 0890-6955; 1879-2170
• DOI: 10.1016/j.ijmachtools.2018.03.004

The chatter vibrations in milling are avoided by selecting spindle speeds and depth of cuts from the stability lobes. However, it has been well observed that the structural dynamics of the spindle system change as a function of speed and even feed. As a result, the measurement of spindle structure's Frequency Response Function (FRF) at zero speed does not lead to an accurate prediction of stability lobes, hence the productive cutting conditions cannot be estimated accurately. In this study, an in-process identification of speed dependent FRF of the spindle structure is proposed. The spindle FRF is either measured during the rotation via impact testing, or FRF is identified from the inverse solution of critical stability limits. The tool-holder is decoupled from the spindle FRF using receptance coupling method, which leads to speed and/or feed dependent spindle shaft FRF. The tool tip FRF is then predicted by coupling the Timoshenko beam based tool-holder to spindle. The proposed method is validated in milling tests. It is shown that the chatter free material removal rates can be more accurately predicted when the spindle speed and feed dependent machine tool dynamics are considered.
•Speed and feed dependent spindle dynamics are identified during operation.•Identification is based on rotating tap tests and inverse stability solution.•Stability predictions of arbitrary tools are made through receptance coupling.•High speed chatter frequencies are predicted accurately for different feed rates.