The influence of temperature on the strain-hardening behavior of Fe-22/25/28Mn-3Al-3Si TRIP/TWIP steels

• Published in: Materialia Vol. 22; no. 1; p. 101425
• Main Authors: Pierce, D.T., Benzing, J.T., Jiménez, J.A., Hickel, T., Bleskov, I., Keum, J., Raabe, D., Wittig, J.E.
• Format: Journal Article
• Language: English
• Published: United States Elsevier B.V 01-05-2022; Elsevier
• Subjects: MATERIALS SCIENCE; Plasticity mechanisms; Stacking fault energy; TRIP steel; Twinning; TWIP steel; Plasticity mechanisms; Stacking fault energy; TRIP steel; Twinning; TWIP steel
• ISSN: 2589-1529; 2589-1529
• DOI: 10.1016/j.mtla.2022.101425

The influence of temperature and stacking fault energy (SFE) on the strain-hardening behavior and critical resolved shear stress for twinning was investigated for three Fe–22/25/28Mn–3Al–3Si wt.% transformation- and twinning-induced plasticity (TRIP/TWIP) steels. The SFEs were calculated by two different methods, density functional theory and statistical thermodynamic modeling. The dislocation structure, observed at low levels of plastic deformation, transitions from “planar” to “wavy” dislocation glide with an increase in temperature, Mn content, and/or SFE. The change in dislocation glide mechanisms from planar to wavy reduces the strain hardening rate, in part due to fewer planar obstacles and greater cross slip activity. In addition, the alloys exhibit a large decrease in strength and ductility with increasing temperature from 25 to 200 °C, attributed to a substantial reduction in the thermally activated component of the flow stress, predominate suppression of TRIP and TWIP, and a significant increase in the critical resolved shear stress for mechanical twinning. Interestingly, the increase in SFE with temperature had a rather minor influence on the critical resolved shear stress for mechanical twinning, and other temperature dependent factors which likely play a more dominant role are discussed.
[Display omitted]