Transport and mechanical properties of self consolidating concrete with high volume fly ash

• Published in: Cement & concrete composites Vol. 31; no. 2; pp. 99 - 106
• Main Authors: Şahmaran, Mustafa, Yaman, İsmail Ö., Tokyay, Mustafa
• Format: Journal Article
• Language: English
• Published: Elsevier Ltd 01-02-2009
• Subjects: High volume fly ash; Mechanical properties; Self consolidating concrete; Transport properties; Mechanical properties; Transport properties; High volume fly ash; Self consolidating concrete
• ISSN: 0958-9465; 1873-393X
• DOI: 10.1016/j.cemconcomp.2008.12.003

This paper presents the transport and mechanical properties of self consolidating concrete that contain high percentages of low-lime and high-lime fly ash (FA). Self consolidating concretes (SCC) containing five different contents of high-lime FA and low-lime FA as a replacement of cement (30, 40, 50, 60 and 70 by weight of total cementitious material) are examined. For comparison, a control SCC mixture without any FA was also produced. The fresh properties of the SCCs were observed through, slump flow time and diameter, V-funnel flow time, L-box height ratio, and segregation ratio. The hardened properties included the compressive strength, split tensile strength, drying shrinkage and transport properties (absorption, sorptivity and rapid chloride permeability tests) up to 365 days. Test results confirm that it is possible to produce SCC with a 70% of cement replacement by both types of FA. The use of high volumes of FA in SCC not only improved the workability and transport properties but also made it possible to produce concretes between 33 and 40
MPa compressive strength at 28 days, which exceeds the nominal compressive strength for normal concrete (30
MPa).