Optimization of transversal flow stress and strain and weld seam microstructure analysis in butt-HDPE friction stir welded plates

• Published in: Mechanics & industry : an international journal on mechanical sciences and engineering applications Vol. 21; no. 5; p. 501
• Main Authors: Hamrouni, Khaled, Rezgui, Mohamed-Ali, Trabelsi, Ali, Kiss, Zoltan, Nasri, Rachid
• Format: Journal Article
• Language: English
• Published: Villeurbanne EDP Sciences 2020
• Subjects: Base metal; Butt welding; Cracks; Defects; Failure modes; Feed rate; Flow-density-speed relationships; Friction stir welding; Heat conductivity; High density polyethylenes; Impact strength; Investigations; Mechanical properties; Morphology; Optimization; Parameter estimation; Polyethylene; Polymers; Polymethyl methacrylate; Process parameters; Rotation; Shoulder; Strain; Tensile strength; Yield strength
• ISSN: 2257-7777; 2257-7750
• DOI: 10.1051/meca/2020047

The paper aims to optimize the characteristic performances of friction stir welding of high-density polyethylene in order to predict failure modes in weld nugget and interfacial zones. Three replicates of a face central composite design are employed to estimate the effects of parameters process, on the transversal flow stress and strain of the seam and to understand root causes, which may lead to structural defects such as the onset of cracks and the seam-base metal rupture. The study findings disclose that maximum responses are obtained when the tool rotation speed is set middle and both the feed rate and the plunged surface are set high. The transversal flow stress of the welded seam is found highly sensitive to the plunged surfaces and at a lesser degree to the rotation speed, whereas, the transversal flow strain of the welded seam is mostly sensitive to the rotation speed and at a lesser degree to the plunged surfaces. For the microscopic analysis, it is shown that at low rotation speed, there exist four structural layers in the transition zone between the seam and the base material giving rise to the formation of a continuous line of cracks that can initiate structure failure.