Numerical Study on Wave Run-up of a Circular Cylinder with Various Diffraction Parameters and Body Drafts

• Published in: Han-guk haeyang gonghak hoeji (Online) Vol. 34; no. 4; pp. 245 - 252
• Main Authors: Jeong, Ho-Jin, Koo, Weoncheol, Kim, Sung-Jae
• Format: Journal Article
• Language: English
• Published: 한국해양공학회 01-08-2020; The Korean Society of Ocean Engineers
• Subjects: circular cylinder; diffraction parameter; numerical wave tank; wave run-up; 해양공학; Circular cylinder; Numerical wave tank; Diffraction parameter; Wave run-up
• ISSN: 1225-0767; 2287-6715
• DOI: 10.26748/KSOE.2020.026

Wave run-up is an important phenomenon that should be considered in ocean structure design. In this study, the wave run-up of a surface-piercing circular cylinder was calculated in the time domain using the three-dimensional linear and fully nonlinear numerical wave tank (NWT) techniques. The NWT was based on the boundary element method and the mixed Eulerian and Lagrangian method. Stokes second-order waves were applied to evaluate the effect of the nonlinear waves on wave run-up, and an artificial damping zone was adopted to reduce the amount of reflected and re-reflected waves from the sidewall of the NWT. Parametric studies were conducted to determine the effect of wavelength, wave steepness, and the draft of the cylinder on the wave run-up of the cylinder. The maximum wave run-up value occurred at 0°, which was in front of the cylinder, and the minimum value occurred near the circumferential angle of 135°. As the diffraction parameter increased, the wave run-up increased up to 1.7 times the wave height. Furthermore, the wave run-up was 4% higher than the linear wave when the wave steepness was 1/35. In particular, the crest height of the wave run-up increased by 8%.