Development of fuzzy logic model for cutting parameters influence on the cutting force and the chip thickness ratio during turning of aluminum alloy 1350-O

• Published in: The Iraqi journal for mechanical and materials engineering. Vol. 18; no. 1; pp. 110 - 130
• Main Author: al-Khafaji, Muhannad Muhammad Husayn
• Format: Journal Article
• Language: Arabic; English
• Published: Babylon, Iraq University of Babylon, College of Engineering 31-07-2018
• ISSN: 2076-1819; 1819-2076; 2313-3783
• DOI: 10.32852/iqjfmme.Vol18.Iss1.77

In turning operation, numerous parameters are utilized to analyze machinability. Parameters,
for instant, tool wear, tool life, cutting temperature, machining force components, power
consumption, surface roughness, and chip thickness ratio are frequently utilized. The goal of
this work is to model the effect of cutting parameters (cutting speed, depth of cut and feed
rate) on the machining force and chip thickness ratio during turning ductile aluminum 1350-
O. Four fuzzy logic models were built to model the relationship between cutting parameters
and the three force components of machining force and the chip thickness ration. The inputs
to all fuzzy logic models are cutting speed, depth of cut and feed rate. Whereas, the output
for first, second, third and fourth models are cutting force, passive force, feed force and chip
thickness ratio, respectively. All fuzzy models showed good match to the experimental data
and the computed correlation coefficients were larger than or equal 0.9998. Those models
were used to optimize the cutting process and give the optimum cutting parameters.