Experimental Study on Mechanical and Acoustic Emission Characteristics of Rock-Like Material Under Non-uniformly Distributed Loads

• Published in: Rock mechanics and rock engineering Vol. 51; no. 3; pp. 729 - 745
• Main Authors: Wang, Xiao, Wen, Zhijie, Jiang, Yujing, Huang, Hao
• Format: Journal Article
• Language: English
• Published: Vienna Springer Vienna 01-03-2018; Springer Nature B.V
• Subjects: Acoustic emission; Acoustic emission testing; Acoustic properties; Acoustics; Civil Engineering; Damage; Earth and Environmental Science; Earth Sciences; Emission analysis; Emissions; Geophysics/Geodesy; Load; Load distribution; Load distribution (forces); Loading rate; Loads (forces); Maintenance management; Mechanical properties; Mining; Monitoring systems; Original Paper; Pollution monitoring; Regions; Rocks; Stress; Stress concentration; Vertical loads; Mining-induced stress; Rock-like material; Stress loading rate; Initial vertical stress
• ISSN: 0723-2632; 1434-453X
• DOI: 10.1007/s00603-017-1363-3

The mechanical and acoustic emission characteristics of rock-like materials under non-uniform loads were investigated by means of a self-developed mining-induced stress testing system and acoustic emission monitoring system. In the experiments, the specimens were divided into three regions and different initial vertical stresses and stress loading rates were used to simulate different mining conditions. The mechanical and acoustic emission characteristics between regions were compared, and the effects of different initial vertical stresses and different stress loading rates were analysed. The results showed that the mechanical properties and acoustic emission characteristics of rock-like materials can be notably localized. When the initial vertical stress and stress loading rate are fixed, the peak strength of region B is approximately two times that of region A, and the maximum acoustic emission hit value of region A is approximately 1–2 times that of region B. The effects of the initial vertical stress and stress loading rate on the peck strain, maximum hit value, and occurrence time of the maximum hit are similar in that when either of the former increase, the latter all decrease. However, peck strength will increase with the increase in loading rate and decrease with the increase in initial vertical stress. The acoustic emission hits can be used to analyse the damage in rock material, but the number of acoustic emission hits cannot be used alone to determine the degree of rock damage directly.