Formation and Mechanical Characterization of Aminoplast Core/Shell Microcapsules

• Published in: ACS applied materials & interfaces Vol. 4; no. 6; pp. 2940 - 2948
• Main Authors: Pretzl, Melanie, Neubauer, Martin, Tekaat, Melanie, Kunert, Carmen, Kuttner, Christian, Leon, Géraldine, Berthier, Damien, Erni, Philipp, Ouali, Lahoussine, Fery, Andreas
• Format: Journal Article
• Language: English
• Published: United States American Chemical Society 27-06-2012
• Subjects: controlled release; compression behavior; emulsions; melamine formaldehyde capsules; hollow polymer shells; stability; elastic properties
• ISSN: 1944-8244; 1944-8252
• DOI: 10.1021/am300273b

This work aims at establishing a link between process conditions and resulting micromechanical properties for aminoplast core/shell microcapsules. The investigated capsules were produced by the in situ polymerization of melamine formaldehyde resins, which represents a widely used and industrially relevant approach in the field of microencapsulation. Within our study, we present a quantitative morphological analysis of the capsules’ size and shell thickness. The diameter of the investigated capsules ranged from 10 to 50 μm and the shell thickness was found in a range between 50 and 200 nm. As key parameter for the control of the shell thickness, we identified the amount of amino resin per total surface area of the dispersed phase. Mechanical properties were investigated using small deformations on the order of the shell thickness by atomic force microscopy with a colloidal probe setup. The obtained capsule stiffness increased with an increasing shell thickness from 2 to 30 N/m and thus showed the same trend on the process parameters as the shell thickness. A simple analytical model was adopted to explain the relation between capsules’ geometry and mechanics and to estimate the elastic modulus of the shell about 1.7 GPa. Thus, this work provides strategies for a rational design of microcapsule mechanics.