Search Results - "Zhihong, Jia"

The structural and compositional evolution of precipitates in Al-Mg-Si-Cu alloy by Ding, Lipeng, Jia, Zhihong, Nie, Jian-Feng, Weng, Yaoyao, Cao, Lingfei, Chen, Houwen, Wu, Xiaozhi, Liu, Qing

“…The structural and compositional evolution of precipitates in Al-Mg-Si-Cu alloys were systematically investigated by atomic resolution high-angle annular…”
Get full text

The influence of Cu addition and pre-straining on the natural aging and bake hardening response of Al-Mg-Si alloys by Ding, Lipeng, Jia, Zhihong, Liu, Yingying, Weng, Yaoyao, Liu, Qing

“…The effect of pre-straining on the natural aging and bake hardening of Al-Mg-Si alloys with different additions of Cu were investigated by Vickers…”
Get full text

Friction stir welding joints of 2195-T8 Al–Li alloys: Correlation of temperature evolution, microstructure and mechanical properties by Peng, Chen, Jing, Chen, Siyi, Qin, Siqi, Zou, Shoubo, Song, Ting, Jiang, Zhiqing, Zhang, Zhihong, Jia, Qing, Liu

“…7.5 mm thick 2195-T8 Al–Li alloy plates were manufactured by friction stir welding (FSW). Thermal history of different regions in welding joints was recorded…”
Get full text

The effect of Mg and Si content on the microstructure, texture and bendability of Al–Mg–Si alloys by Li, Zhenguo, Zhang, Zhijun, Zhou, Guangwen, Zhao, Pizhi, Jia, Zhihong, Poole, Warren J.

“…In this paper, four model Al–Mg–Si automotive sheet alloys with different Mg and Si contents were prepared and heated treated to the same T4P temper (solution…”
Get full text

Wettable copper hydroxide cotton fabric for oil-water separation made by surface micro-dissolution by Liu, Yiping, Yang, Jinlong, Sun, Yiwei, Jia, Zhihong, Zhang, Xiaolei, Wu, Dayang, Lu, Ming

“…Cotton textiles with special surface wettability, high adsorption capacity and low cost have a promising future for oily wastewater purification. A facile and…”
Get full text

The Influence of Composition on the Clustering and Precipitation Behavior of Al-Mg-Si-Cu Alloys by Jia, Zhihong, Ding, Lipeng, Cao, Lingfei, Sanders, Robert, Li, Shichen, Liu, Qing

“…The natural aging (NA) and artificial aging (AA) behavior of Al-Mg-Si-Cu alloys with different Mg/Si ratios and Cu additions were systematically investigated…”
Get full text

Microstructure and property evolution of Al-0.4Fe-0.15Zr-0.25Er alloy processed by high pressure torsion by Kong, Yaping, Pu, Qingqing, Jia, Zhihong, Liu, Manping, Roven, Hans J., Jia, Jiaqi, Liu, Qing

“…An Al-0.4Fe-0.15Zr-0.25Er alloy was processed by high pressure torsion (HPT) at room temperature in order to explore the evolution of property, microstructure…”
Get full text

Microstructure Evolution and Recrystallization Resistance of a 7055 Alloy Fabricated by Spray Forming Technology and by Conventional Ingot Metallurgy by Xie, Zhiqiang, Jia, Zhihong, Xiang, Kaiyun, Kong, Yaping, Li, Zhenguo, Fan, Xi, Ma, Wantai, Zhang, Hao, Lin, Lin, Marthinsen, Knut, Liu, Qing

“…The effect of different fabricating processes (spray forming and conventional casting) and homogenization treatment on the microstructure of an 7055 alloy was…”
Get full text

Understanding the Role of Short-Range Order in the Nucleation and Transformation of the B′/Q′ Precipitates in Al-Mg-Si(-Cu) Alloys by Ding, Lipeng, Weng, Yaoyao, Jia, Zhihong, Zang, Ruojin, Liu, Qing

“…The understanding of metastable hardening precipitate evolution in Al-Mg-Si(-Cu) is still quite confused and elusive due to the disordered nature of several…”
Get full text

Influence of interrupted quenching and pre-aging on the bake hardening of Al–Mg–Si Alloy by Ding, Lipeng, Weng, Yaoyao, Wu, Sainan, Sanders, Robert E., Jia, Zhihong, Liu, Qing

“…Thermal treatments such as pre-aging (PA) of Al–Mg–Si alloy sheet are important and necessary in the industrial production of automotive body panels…”
Get full text

Study of the Q′ (Q)-phase precipitation in Al–Mg–Si–Cu alloys by quantification of atomic-resolution transmission electron microscopy images and atom probe tomography by Ding, Lipeng, Orekhov, Andrey, Weng, Yaoyao, Jia, Zhihong, Idrissi, Hosni, Schryvers, Dominique, Muraishi, Shiji, Hao, Longlong, Liu, Qing

“…The precipitation mechanism of the Q phase in Al–Mg–Si–Cu alloys has long been the subject of ambiguity and debate since its metastable phase (Q′) has the same…”
Get full text

Investigation on deformation behaviors and dynamic recrystallization mechanism of spray formed Al–Zn–Mg–Cu alloy under hot compression by Zhang, Zhiwu, Liu, Ruxue, Li, Dayong, Peng, Yinghong, Zhou, Guowei, Jia, Zhihong, Ma, Wantai

“…The thermal deformation behavior of spray formed Al–Zn–Mg–Cu alloy was investigated by the isothermal hot compression tests at the strain rates of 0.001–10 s−1…”
Get full text

Layout Optimization and Performance Analysis of Vehicle Suspension System Using an Electromagnetic Inerter by Luo, Chen, Yang, Xiaofeng, Jia, Zhihong, Liu, Changning

“…The inerter is a vibration isolation device used to replace the mass element in classical vibration isolation theory. The introduction of an inerter into a…”
Get full text

The Performance Enhancement of a Vehicle Suspension System Employing an Electromagnetic Inerter by Luo, Chen, Yang, Xiaofeng, Jia, Zhihong, Liu, Changning, Yang, Yi

“…As a newly conceived vibration isolation element, an inerter can be implemented in different forms, and it is easily introduced in different vibration…”
Get full text

Creep behavior and microstructural evolution of 8030 aluminum alloys compressed at intermediate temperature by Chen, Peng, Fan, Xiangze, Yang, Qingbo, Zhang, Zhiqing, Jia, Zhihong, Liu, Qing

“…The compression creep behavior of 8030 aluminum alloys at intermediate temperature was studied under the deformation temperature of 200∼250 °C and compression…”
Get full text

The Effects of Double-Step Homogenization on Precipitation Behavior of Al3Zr Dispersoids and Microstructural Evolution in 2196 Aluminum Alloy by Zhou, Hongyu, Ding, Lipeng, Liu, Manping, Zeng, Ying, Lei, Xiuchuan, Weng, Yaoyao, Wang, Kui, Jia, Zhihong

“…The effects of double-step homogenization processes on the precipitation of Al3Zr dispersoids and the dissolution of the primary phases of 2196 aluminum alloy…”
Get full text

Stress-dependent subsurface structural transformations of gradient nanograin Ti–6Al–4V alloy and its impact on wear behavior by Wang, Chenglin, Zhang, Yonggang, Zhang, Haitao, Liu, Jiyu, Sun, Zhonggang, Fu, Xuesong, Zhou, Wenlong, Ding, Lipeng, Jia, Zhihong

“…Gradient nanograin (GNG) metals possess outstanding resistance to sliding friction and wear. The tribolayer plays a major role in the wear performance of…”
Get full text

The orientation relationships of nanobelt-like Si2Hf precipitates in an Al-Si-Mg-Hf alloy by Wang, Xueli, Huang, Huilan, Gu, Xinfu, Li, Yanjun, Jia, Zhihong, Liu, Qing

“…The orientation relationships (ORs) between the Al matrix and Si2Hf precipitates with an orthorhombic structure in an Al–Si–Mg–Hf alloy after heat treatment at…”
Get full text

The Effect of Thermomechanical Processing Sequence on the Dispersoid Distribution and Final Mechanical Properties of Spray-Formed Al-Cu-Li Alloy by Ning, Yaru, Zhang, Xingchen, Huang, Yunjia, Ding, Lipeng, Lei, Xiuchuan, Weng, Yaoyao, Cao, Lingfei, Zhang, Ke, Jia, Zhihong

“…Controlling the formation of the β′ (Al3Zr) phase is pivotal for regulating the recrystallization and thus the mechanical properties of the spray formed 2195…”
Get full text

Effect of homogenization and alloying elements on recrystallization resistance of Al–Zr–Mn alloys by Jia, Zhihong, Hu, Guiqing, Forbord, Børge, Solberg, Jan Ketil

“…One of the main problems of using Al 3Zr in order to stabilize the microstructure in aluminium alloys, i.e. to inhibit recrystallization, is that these…”
Get full text