Search Results - "Yang, HJ"

Transition of twinning behavior in CoCrFeMnNi high entropy alloy with grain refinement by Sun, S.J., Tian, Y.Z., Lin, H.R., Yang, H.J., Dong, X.G., Wang, Y.H., Zhang, Z.F.

“…Fully recrystallized CoCrFeMnNi high entropy alloys (HEAs) with different grain sizes ranging from 503nm to 88.9µm were fabricated by cold rolling and…”
Get full text

A hexagonal close-packed high-entropy alloy: The effect of entropy by Zhao, Y.J., Qiao, J.W., Ma, S.G., Gao, M.C., Yang, H.J., Chen, M.W., Zhang, Y.

“…The formation of disordered solid solution in the hexagonal close-packed (hcp) structure in the GdHoLaTbY alloy and its mechanical properties were investigated…”
Get full text

A novel cobalt-free FeMnCrNi medium-entropy alloy with exceptional yield strength and ductility at cryogenic temperature by Bian, B.B., Guo, N., Yang, H.J., Guo, R.P., Yang, L., Wu, Y.C., Qiao, J.W.

“…In this study, a novel cobalt-free Fe40Mn20Cr20Ni20 (at.%) medium-entropy alloy (MEA) with low cost is purposively designed. The partially recrystallized…”
Get full text

Facile loading mesoporous Co3O4 on nitrogen doped carbon matrix as an enhanced oxygen electrode catalyst by He, X., Luan, S.Z., Wang, L., Wang, R.Y., Du, P., Xu, Y.Y., Yang, H.J., Wang, Y.G., Huang, K., Lei, M.

“…•A facile route was developed to fabricate Co3O4@NMC OER/ORR catalysts.•Co3O4@NMC (1:3) exhibits a considerable ORR/OER activity and stability.•Accelerated…”
Get full text

Effects of the element La on the corrosion properties of CrMnFeNi high entropy alloys by Sun, Y.P., Wang, Z., Yang, H.J., Lan, A.D., Qiao, J.W.

“…The effect of minor inclusion of rare earth element of lanthanum into a well-established high entropy alloy system of CrMnFeNi on their corrosion resistance…”
Get full text

Heterogeneous microstructure and voids dependence of tensile deformation in a selective laser melted AlSi10Mg alloy by Ben, D.D., Ma, Y.R., Yang, H.J., Meng, L.X., Shao, X.H., Liu, H.Q., Wang, S.G., Duan, Q.Q., Zhang, Z.F.

“…Microstructure and voids evolution of a selective laser melted (SLM) AlSi10Mg alloy during tension were systematically investigated. The SLM AlSi10Mg sample is…”
Get full text

Noncanonical Inflammasome Activation of Caspase-4/Caspase-11 Mediates Epithelial Defenses against Enteric Bacterial Pathogens by Knodler, Leigh A., Crowley, Shauna M., Sham, Ho Pan, Yang, Hyungjun, Wrande, Marie, Ma, Caixia, Ernst, Robert K., Steele-Mortimer, Olivia, Celli, Jean, Vallance, Bruce A.

“…Inflammasome-mediated host defenses have been extensively studied in innate immune cells. Whether inflammasomes function for innate defense in intestinal…”
Get full text

Tribological behavior of boronized Al0.1CoCrFeNi high-entropy alloys under dry and lubricated conditions by Wu, Y.H., Yang, H.J., Guo, R.P., Wang, X.J., Shi, X.H., Liaw, P.K., Qiao, J.W.

“…High-entropy alloys (HEAs) with a single-phase face-centered cubic (FCC) structure generally have excellent plasticity. However, its limited room temperature…”
Get full text

Dynamic tension and constitutive model in Fe40Mn20Cr20Ni20 high-entropy alloys with a heterogeneous structure by Wang, Y.Z., Jiao, Z.M., Bian, G.B., Yang, H.J., He, H.W., Wang, Z.H., Liaw, P.K., Qiao, J.W.

“…Face-centered-cubic (FCC) Fe40Mn20Cr20Ni20 high-entropy alloys (HEAs) with a weigh of 50 Kg were fabricated by industrialized vacuum-induction melting. This…”
Get full text

Ultra-high strain-rate strengthening in ductile refractory high entropy alloys upon dynamic loading by Zhang, S., Wang, Z., Yang, H.J., Qiao, J.W., Wang, Z.H., Wu, Y.C.

“…The mechanical properties and strain-rate strengthening mechanism of single-phase TiZrHfNbTaMox (x = 0.25, 0.5, and 0.75) refractory high entropy alloys…”
Get full text

Enhanced tensile and bending yield strengths of 304 stainless steel and H62 brass by surface spinning strengthening by Ren, C.X., Wang, Q., Zhang, Z.J., Yang, H.J., Zhang, Z.F.

“…In this work, the tensile and bending yield strengths of 304 stainless steel and H62 brass are effectively enhanced by surface spinning strengthening (3S) that…”
Get full text

Effects of electropulsing on the microstructure and microhardness of a selective laser melted Ti6Al4V alloy by Gao, J.B., Ben, D.D., Yang, H.J., Meng, L.X., Ji, H.B., Lian, D.L., Chen, J., Yi, J.L., Wang, L., Li, P., Zhang, Z.F.

“…•Rapid softening and hardening phenomenon are found in the SLM Ti6Al4V alloy after EPT.•The changes of microhardness were attributed to the phase…”
Get full text

High-temperature sliding wear behavior of nitrided Ni45(CoCrFe)40(AlTi)15 high-entropy alloys by Lan, L.W., Yang, H.J., Guo, R.P., Wang, X.J., Zhang, M., Liaw, P.K., Qiao, J.W.

“…The nitrided layer on Ni45(CoCrFe)40(AlTi)15 high-entropy alloys (HEAs) was prepared by plasma nitriding. The microstructure, hardness, the effect of…”
Get full text

Strain rate effects on the dynamic mechanical properties of the AlCrCuFeNi2 high-entropy alloy by Ma, S.G., Jiao, Z.M., Qiao, J.W., Yang, H.J., Zhang, Y., Wang, Z.H.

“…The AlCrCuFeNi2 high-entropy alloy with a mixed face-centered cubic (FCC) plus body-centered cubic (BCC) structure is investigated. The as-cast sample shows a…”
Get full text

Effects of defects and microstructures on tensile properties of selective laser melted Ti6Al4V alloys fabricated in the optimal process zone by Meng, L.X., Yang, H.J., Ben, D.D., Ji, H.B., Lian, D.L., Ren, D.C., Li, Y., Bai, T.S., Cai, Y.S., Chen, J., Yi, J.L., Wang, L., Yang, J.B., Zhang, Z.F.

“…The aim of selective laser melting (SLM) technology is to obtain high quality workpieces through optimization of processing parameters. However, the defects…”
Get full text

Excellent combination of strength and ductility in CoNiCr-based MP159 alloys at cryogenic temperature by Pei, B., Fan, J.P., Wang, Z., Yang, H.J., Qiao, J.W., Bi, Z.N., Gan, B.

“…In this study, a multi-component single-phase CoNiCr-based MP159 alloy with a high dislocation density is investigated when subjected to cold rolling. The…”
Get full text

Lysobacter enzymogenes LE16 autolysates have potential as biocontrol agents—Lysobacter sp. autolysates as biofungicide by Chen, D.M., Yang, H.J., Huang, J.G., Yuan, L.

“…Aims Biological techniques can manage plant diseases safely and in environmentally friendly ways, but their efficacy needs improvement. It is of the utmost…”
Get full text

Exploring the strength and ductility improvement of Cu–Al alloys by Ren, C.X., Wang, Q., Hou, J.P., Zhang, Z.J., Yang, H.J., Zhang, Z.F.

“…Synchronous improvement of the strength and ductility for metallic materials is an everlasting object as the good service performance. In this study, the yield…”
Get full text

Optimizing the fatigue strength of 18Ni maraging steel through ageing treatment by Wang, B., Zhang, P., Duan, Q.Q., Zhang, Z.J., Yang, H.J., Li, X.W., Zhang, Z.F.

“…It is confirmed that the fatigue strength of high-strength metals would not continuously increase as the tensile strength enhances. In order to find out the…”
Get full text

Effects of embedded spherical pore on the tensile properties of a selective laser melted Ti6Al4V alloy by Meng, L.X., Ben, D.D., Yang, H.J., Ji, H.B., Lian, D.L., Zhu, Y.K., Chen, J., Yi, J.L., Wang, L., Yang, J.B., Zhang, Z.F.

“…Selective laser melting (SLM) is one of the most promising additive manufacturing (AM) technologies in recent years. However, some sub-millimeter defects often…”
Get full text