Search Results - "Vallo, C. I."

Properties and structure of cyanate ester/polysulfone/organoclay nanocomposites by Mondragón, I., Solar, L., Nohales, A., Vallo, C.I., Gómez, C.M.

“…In this paper, a cyanate ester (CE) matrix has been modified with polysulfone and an organic montmorillonite (Nanofil 919). The blend was thermally cured in…”
Get full text

Role of intrinsic flaws upon flexural behaviour of a thermoplastic modified epoxy resin by Giannotti, M.I., Galante, M.J., Oyanguren, P.A., Vallo, C.I.

“…A bisphenol A-based epoxy resin (DGEBA) was modified with 15 weight percent polysulphone (PSU) and thermally cured using 4-4′diaminodiphenylsulphone (DDS)…”
Get full text

Influence of load type on flexural strength of a bone cement based on PMMA by Vallo, C.I.

“…The Weibull cumulative distribution function, which is commonly used in the characterisation of brittle materials, was used to describe the wide data scatter…”
Get full text

Residual monomer content in bone cements based on poly(methyl methacrylate) by Vallo, Claudia I

“…Acrylic bone cements are widely used in orthopaedics, and it is generally accepted that due to the vitrification phenomenon the monomer does not reach complete…”
Get full text

Influence of cross-linked PMMA beads on the mechanical behavior of self-curing acrylic cements by Vallo, C. I., Abraham, G. A., Cuadrado, T. R., San Román, J.

“…Cross‐linked PMMA beads were prepared with the use of two cross‐linking agents with different chain lengths: triethylene glycol dimethacrylate (TEGDMA) and…”
Get full text

Mechanical characterization of self-curing acrylic cements formulated with poly(methylmethacrylate)/poly(ϵ-caprolactone) beads by Abraham, G. A., Vallo, C. I., Román, J. San, Cuadrado, T. R.

“…New acrylic‐based cements were formulated by replacing a mass fraction of 20% of poly(methyl methacrylate) (PMMA) powder by PMMA/poly(ϵ‐caprolactone) (PCL)…”
Get full text

Toughened-hybrid epoxies : influence of the rubber-phase morphology on mechanical properties by VALLO, C. I, LIJIANG HU, FRONTINI, P. M, WILLIAMS, R. J. J

“…A toughened-epoxy polymer based on diglycidylether of bisphenol A (DGEBA) cured with ethylenediamine (EDA) and modified with a rubber based on an…”
Get full text

Mechanical and Fracture Behaviour Evaluation of Commercial Acrylic Bone Cements by Vallo, Claudia I., Cuadrado, Teresita R., Frontini, Patricia M.

“…The deformation and fracture behaviour of some commercial acrylic bone cements have been investigated. Cements were characterized by gel permeation…”
Get full text

Effect of residual monomer content on some properties of a poly(methyl methacrylate)-based bone cement by Vallo, C. I., Montemartini, P. E., Cuadrado, T. R.

“…Through this article, the degree of polymerization attainable in a commercial acrylic bone cement based on poly(methyl methacrylate) (PMMA) was investigated by…”
Get full text

Properties of acrylic bone cements formulated with Bis-GMA by Vallo, Claudia I., Schroeder, Walter F.

“…Experimental cement formulations were prepared by replacing part of the methylmethacrylate (MMA) liquid phase of a conventional surgical cement with an…”
Get full text

Estimation of Weibull parameters for the flexural strength of PMMA-based bone cements by Riccardi, Carmen C., Vallo, Claudia I.

“…The wide scatter of data observed in the strength of bone cements based on poly(methyl methacrylate) (PMMA) can be described properly by the two‐parameter…”
Get full text

Influence of pressurization on flexural strength distributions of PMMA-based bone cements by Guidoni, Griselda, Vallo, Claudia I

“…Flexural strength distributions of standard viscosity and low viscosity bone cements based on Polymethylmethacrylate were obtained by testing the materials in…”
Get full text

Polymethylmethacrylate-based bone cement modified with hydroxyapatite by Vallo, Claudia I., Montemartini, Pablo E., Fanovich, Maria A., López, José M. Porto, Cuadrado, Teresita R.

“…A commercial acrylic bone cement was modified by the incorporation of different weight fractions of polycrystalline hydroxyapatite (HA), and the modified…”
Get full text

Statistics of free-radical polymerizations revisited using a fragment approach. II: Polyfunctional monomers by WILLIAMS, R. J. J, VALLO, C. I

“…A fragment approach is used to derive statistical parameters of networks prepared from the free-radical polymerization of an A sub 2 + A sub f system, allowing…”
Get full text

Influence of filler content on static properties of glass-reinforced bone cement by Vallo, Claudia I.

“…A commercial acrylic bone cement was modified by the incorporation of different weight fractions of glass spheres. The influence of the filler proportion on…”
Get full text

Flexural strength distribution of a PMMA-based bone cement by Vallo, Claudia I.

“…Polymethylmethacrylate bone cement containing either no added antibiotic or 0.5 g of Gentamicin was prepared and stored either in air at room temperature or in…”
Get full text

Mechanical characterization of self-curing acrylic cements formulated with poly(methylmethacrylate)/poly( gradient by Abraham, G A, Vallo, C I, Roman, J San, Cuadrado, T R

“…New acrylic-based cements were formulated by replacing a mass fraction of 20% of poly(methyl methacrylate) (PMMA) powder by PMMA/poly(-caprolactone) (PCL)…”
Get full text

Polymethyl methacrylate-based bone cement modified with hydroxyapatite by Vallo, C I, Montemartini, P E, Fanovich, M A, Lopez, J M P, Cuadrado, T R

“…A commercial acrylic bone cement was modified by the incorporation of different weight fractions of polycrystalline hydroxyapatite (HA), and the modified…”
Get full text

Theoretical prediction and experimental determination of the effect of mold characteristics on temperature and monomer conversion fraction profiles during polymerization of a PMMA-based bone cement by Vallo, Claudia I.

“…The present work is concerned with applications of a kinetic model for free‐radical polymerization of a polymethylmethacrylate‐based bone cement. Autocatalytic…”
Get full text

Statistics of free-radical polymerizations revisited using a fragment approach. 2. Polyfunctional monomers by Williams, Roberto J. J, Vallo, Claudia I

Get full text