Search Results - "Sung Jin Jung"

Selective Dissolution‐Derived Nanoporous Design of Impurity‐Free Bi2Te3 Alloys with High Thermoelectric Performance by Lee, Seunghyeok, Jung, Sung‐Jin, Park, Gwang Min, Na, Min Young, Kim, Kwang‐Chon, Hong, Junpyo, Lee, Albert S., Baek, Seung‐Hyub, Kim, Heesuk, Park, Tae Joo, Kim, Jin‐Sang, Kim, Seong Keun

“…Thermoelectric technology, which has been receiving attention as a sustainable energy source, has limited applications because of its relatively low conversion…”
Get full text

A highly-efficient, concentrating-photovoltaic/thermoelectric hybrid generator by Kil, Tae-Hyeon, Kim, Sanghyeon, Jeong, Dae-Han, Geum, Dae-Myeong, Lee, Sooseok, Jung, Sung-Jin, Kim, Sangtae, Park, Chan, Kim, Jin-Sang, Baik, Jeong Min, Lee, Ki-Suk, Kim, Chang Zoo, Choi, Won Jun, Baek, Seung-Hyub

“…A concentrating photovoltaic (CPV) cell exhibits the highest conversion efficiency among any solar cells. However, the further enhancement of the CPV…”
Get full text

A 3.9-kHz Frame Rate and 61.0-dB SNR Analog Front-End IC With 6-bit Pressure and Tilt Angle Expressions of Active Stylus Using Multiple-Frequency Driving Method for Capacitive Touch Screen Panels by An, Jae-Sung, Han, Sang-Hyun, Kim, Ju Eon, Yoon, Dong-Hyun, Kim, Young-Hwan, Hong, Han-Hee, Ye, Jae-Hun, Jung, Sung-Jin, Lee, Seung-Hwan, Jeong, Ji-Yong, Baek, Kwang-Hyun, Hong, Seong-Kwan, Kwon, Oh-Kyong

“…This paper proposes an analog front-end (AFE) IC using a multiple-frequency driving method (MFDM). The proposed AFE IC achieves a high signal-to-noise ratio…”
Get full text

Impurity-free, mechanical doping for the reproducible fabrication of the reliable n-type Bi2Te3-based thermoelectric alloys by Jung, Sung-Jin, Lee, Byeong-Hyeon, Kim, Byung Kyu, Lim, Sang-Soon, Kim, Seong Keun, Kim, Dong-Ik, Won, Sung Ok, Park, Hyung-Ho, Kim, Jin-Sang, Baek, Seung-Hyub

“…Precise control of carrier density is essential to synthesize high-performance thermoelectric materials. Doping by impurities is often frustrated in n-type…”
Get full text

Clinical outcomes of endoscopic resection for colorectal laterally spreading tumors with advanced histology by Jung, Jin-Sung, Hong, Ji-Yun, Oh, Hyung-Hoon, Kweon, Sun-Seog, Lee, Jun, Kim, Sang-Wook, Seo, Geom-Seog, Kim, Hyun-Soo, Joo, Young-Eun

“…Background Colorectal laterally spreading tumors (LSTs) are large, flat neoplasms that are usually treated using different endoscopic techniques based on their…”
Get full text

A Highly Noise-Immune Capacitive Touch Sensing System Using an Adaptive Chopper Stabilization Method by An, Jae-Sung, Jung, Sung-Jin, Hong, Seong-Kwan, Kwon, Oh-Kyong

“…This paper proposes a capacitive touch sensing system (CTSS) using an adaptive chopper stabilization (ACS) method to achieve high noise immunity. The proposed…”
Get full text

Low-Power Low-Noise Amplifier Using Attenuation-Adaptive Noise Control for Ultrasound Imaging Systems by Jung, Sung-Jin, Hong, Seong-Kwan, Kwon, Oh-Kyong

“…This paper presents a low-noise amplifier (LNA) using attenuation-adaptive noise control (AANC) for ultrasound imaging systems. The proposed AANC reduces…”
Get full text

A Readout IC Using Two-Step Fastest Signal Identification for Compact Data Acquisition of PET Systems by Jung, Sung-Jin, Hong, Seong-Kwan, Kwon, Oh-Kyong

“…A readout integrated circuit (ROIC) using two-step fastest signal identification (FSI) is proposed to reduce the number of input channels of a data acquisition…”
Get full text

Texture-induced reduction in electrical resistivity of p-type (Bi,Sb)2Te3 by a hot extrusion by Min, Bongki, Lim, Sang-Soon, Jung, Sung-Jin, Kim, Gareoung, Lee, Byeong-Hyeon, Won, Sung Ok, Kim, Seong Keun, Rhyee, Jong-Soo, Kim, Jin-Sang, Baek, Seung-Hyub

“…The electrical resistance of a thermoelectric module is an important parameter as well as the thermoelectric figure-of-merit for the application of both waste…”
Get full text

Selective Area Epitaxy of Complex Oxide Heterostructures on Si by Oxide Hard Mask Lift-Off by Ning, Ruiguang, Jung, Soo Young, Choi, Haneul, Lee, Byeong-hyeon, Kim, Min-Seok, Choi, Hyung-Jin, Lee, Jun Young, Park, Jin Soo, Jung, Sung-Jin, Jang, Ho Won, Won, Sung Ok, Chang, Hye Jung, Jang, Ji-Soo, Lee, Kyu Hyoung, Lee, Byung Chul, Baek, Seung-Hyub

“…Epitaxial complex oxide heterostructures on Si are an excellent platform for the realization of multifunctional electronic devices to exploit the unique…”
Get full text

A Low-Power Analog Delay Line Using a Current-Splitting Method for 3-D Ultrasound Imaging Systems by Jeong, Ji-Yong, An, Jae-Sung, Jung, Sung-Jin, Hong, Seong-Kwan, Kwon, Oh-Kyong

“…We propose an analog delay line (ADL) that adopts a current-splitting method (CSM) to reduce power consumption. The proposed ADL employs a pipelined…”
Get full text

Effect of Heat Treatment on the Thermoelectric Properties of Bismuth–Antimony–Telluride Prepared by Mechanical Deformation and Mechanical Alloying by Lee, Deuk-Hee, Lee, Jae-Uk, Jung, Sung-Jin, Baek, Seung-Hyub, Kim, Ju-Heon, Kim, Dong-Ik, Hyun, Dow-Bin, Kim, Jin-Sang

“…In this work, p -type 20%Bi 2 Te 3 –80%Sb 2 Te 3 bulk thermoelectric (TE) materials were prepared by mechanical deformation (MD) of pre-melted ingot and by…”
Get full text

Porous organic filler for high efficiency of flexible thermoelectric generator by Jung, Sung-Jin, Shin, Joonchul, Lim, Sang-Soon, Kwon, Beomjin, Baek, Seung-Hyub, Kim, Seong Keun, Park, Hyung-Ho, Kim, Jin-Sang

“…Flexible thermoelectric modules (TEMs) are often built with a polymer filler as structural support. However, the filler may serve as a thermal bypass, leading…”
Get full text

Grain boundary engineering strategy for simultaneously reducing the electron concentration and lattice thermal conductivity in n-type Bi2Te2.7Se0.3-based thermoelectric materials by Lee, Seunghyeok, Jung, Sung-Jin, Park, Gwang Min, Hong, Junpyo, Lee, Albert S., Baek, Seung-Hyub, Kim, Heesuk, Park, Tae Joo, Kim, Jin-Sang, Kim, Seong Keun

“…This study demonstrates atomic layer deposition (ALD) of an extremely thin Al2O3 layer over n-type Bi2Te2.7Se0.3 to alleviate the adverse effects of multiple…”
Get full text

Unlocking the Potential of Porous Bi2Te3‑Based Thermoelectrics Using Precise Interface Engineering through Atomic Layer Deposition by Lee, Seunghyeok, Park, Gwang Min, Kim, Younghoon, Lee, So-Hyeon, Jung, Sung-Jin, Hong, Junpyo, Kim, Sung-Chul, Won, Sung Ok, Lee, Albert S., Chung, Yoon Jang, Kim, Ju-Young, Kim, Heesuk, Baek, Seung-Hyub, Kim, Jin-Sang, Park, Tae Joo, Kim, Seong Keun

“…Porous thermoelectric materials offer exciting prospects for improving the thermoelectric performance by significantly reducing the thermal conductivity…”
Get full text

Mapping thermoelectric properties of polycrystalline n-type Bi2Te3-xSex alloys by composition and doping level by Jung, Sung-Jin, Lee, Byeong-Hyeon, Won, Sung Ok, Kim, Seong Keun, Park, Hyung-Ho, Kim, Jin-Sang, Baek, Seung-Hyub

“…The thermoelectric figure-of-merit (zT) is a general standard used to evaluate the performance of thermoelectric materials. However, the performance of…”
Get full text

Study of the relationship between process parameters, volatility of Te, and physical properties in n-type Bi2Te3-based alloys for the reproducible fabrication of high-performance thermoelectric materials by Jung, Sung-Jin, Lim, Sang-Soon, Lee, Byeong-Hyeon, Won, Sung Ok, Park, Hyung-Ho, Kim, Seong Keun, Kim, Jin-Sang, Baek, Seung-Hyub

“…Solid compounds containing volatile elements often deviate from the stoichiometric composition, owing to the loss of the volatile species during thermal…”
Get full text

Selective Dissolution-Derived Nanoporous Design of Impurity-Free Bi 2 Te 3 Alloys with High Thermoelectric Performance by Lee, Seunghyeok, Jung, Sung-Jin, Park, Gwang Min, Na, Min Young, Kim, Kwang-Chon, Hong, Junpyo, Lee, Albert S, Baek, Seung-Hyub, Kim, Heesuk, Park, Tae Joo, Kim, Jin-Sang, Kim, Seong Keun

“…Thermoelectric technology, which has been receiving attention as a sustainable energy source, has limited applications because of its relatively low conversion…”
Get full text

Hot rolling process for texture development and grain refinement of n-type Bi2Te3 alloys by Jung, Sung-Jin, Lee, Byeong-Hyeon, Won, Sung Ok, Baek, Seung-Hyub, Kim, Jin-Sang, Kim, Seong Keun

“…[Display omitted] •A hot rolling process leads to texture development and grain refinement of n-type Bi2Te3 alloys.•The (00 l) planes are more aligned parallel…”
Get full text

Combined hot extrusion and spark plasma sintering method for producing highly textured thermoelectric Bi2Te3 alloys by Lim, Sang-Soon, Jung, Sung-Jin, Kim, Byung Kyu, Kim, Dong-Ik, Lee, Byeong-Hyeon, Won, Sung Ok, Shin, Joonchul, Park, Hyung-Ho, Kim, Seong Keun, Kim, Jin-Sang, Baek, Seung-Hyub

“…Hot extrusion is a promising method for producing high-performance thermoelectric bismuth telluride alloys because of its ability to create textured…”
Get full text