Search Results - "Skrzekut, Tomasz"

Evolution of Properties of High-Strength and High-Mg-Content CuMg Alloys After Being Subjected to Single Operation 50% Deformation in Hot and Cold Upsetting Tests by Strzępek, Paweł, Zasadzińska, Małgorzata, Noga, Piotr, Skrzekut, Tomasz

“…Since most hot and cold metal-forming processes originate from various casting processes, it is important to test their susceptibility to the deformation of…”
Get full text

Microstructure and Mechanical Properties of Al-Si Alloys Produced by Rapid Solidification and Hot Extrusion by Noga, Piotr, Skrzekut, Tomasz, Wędrychowicz, Maciej

“…The paper presents the results of tests of rapid solidification (RS) aluminum alloys with the addition of silicon (5%, 11%, and 20%). Casting by melt-spinning…”
Get full text

Recycling of Electrical Cables—Current Challenges and Future Prospects by Wędrychowicz, Maciej, Kurowiak, Jagoda, Skrzekut, Tomasz, Noga, Piotr

“…Civilization and technical progress are not possible without energy. Dynamic economic growth translates into a systematic increase in demand for electricity…”
Get full text

Recycling of Hard Disk Drive Platters via Plastic Consolidation by Skrzekut, Tomasz, Wędrychowicz, Maciej, Piotrowicz, Andrzej

“…The paper presents the comparison of two methods of recycling aluminum from HDD platters—the melting method and the method of plastic consolidation. The main…”
Get full text

Research on the consolidation and strengthening of Ti6Al4V-GO sinters by Skrzekut, Tomasz, Jaworska, Lucyna, Noga, Piotr, Jeleń, Piotr, Cempura, Grzegorz

“…The paper presents the optimization of the sintering process by SPS of Ti6Al4V powders and the study of the impact of graphene oxide (GO) on this material. The…”
Get full text

Research of Friction Stir Welding Process for 6082-T6 Aluminum Alloy by Noga, Piotr, Skrzekut, Tomasz, Wędrychowicz, Maciej, Węglowski, Marek St, Węglowska, Aleksandra

“…The paper presents the results of the joining tests of the EN AW-6082 T6 alloy. The materials were joined using the EBW high-energy (electron beam welding) and…”
Get full text

Effect of Various Forms of Aluminum 6082 on the Mechanical Properties, Microstructure and Surface Modification of the Profile after Extrusion Process by Noga, Piotr, Piotrowicz, Andrzej, Skrzekut, Tomasz, Zwoliński, Adam, Strzępek, Paweł

“…This article presents a method of reusing aluminum scrap from alloy 6082 using the hot extrusion process. Aluminum chips from milling and turning processes,…”
Get full text

Studies of Selective Recovery of Zinc and Manganese from Alkaline Batteries Scrap by Leaching and Precipitation by Skrzekut, Tomasz, Piotrowicz, Andrzej, Noga, Piotr, Wędrychowicz, Maciej, Bydałek, Adam W

“…Recovery of zinc and manganese from scrapped alkaline batteries were carried out in the following way: leaching in H SO and selective precipitation of zinc and…”
Get full text

Recovery of Non-Ferrous Metals from PCBs Scrap by Liquation from Lead by Wędrychowicz, Maciej, Piotrowicz, Andrzej, Skrzekut, Tomasz, Noga, Piotr, Bydalek, Adam

“…This article presents the results of research on the recycling of non-ferrous metals from PCB scrap using melting in metallic lead. The idea of this process is…”
Get full text

Zirconium Phase Transformation under Static High Pressure and ω-Zr Phase Stability at High Temperatures by Jaworska, Lucyna, Cyboron, Jolanta, Cygan, Slawomir, Zwolinski, Adam, Onderka, Boguslaw, Skrzekut, Tomasz

“…High-purity Zr has been observed to undergo a phase transformation from the α-phase to the hexagonal ω-phase under high pressure generated either statically or…”
Get full text

Research of Friction Stir Welding (FSW) and Electron Beam Welding (EBW) Process for 6082-T6 Aluminum Alloy by Noga, Piotr, Skrzekut, Tomasz, Wędrychowicz, Maciej, Węglowski, Marek St, Węglowska, Aleksandra

“…The paper presents the results of the joining tests of the EN AW-6082 T6 alloy. The materials were joined using the EBW high-energy (electron beam welding) and…”
Get full text

Influence of the high-pressure ω - Zr phase on selected properties of sintered zirconium powder materials by Zwolinski, Adam, Letocha, Aneta, Cyboron, Jolanta, Noga, Piotr, Skrzekut, Tomasz, Podsiadlo, Marcin, Lis, Lukasz, Jaworska, Lucyna, Boczkal, Grzegorz

“…Most commercial zirconium alloys are obtained by melting methods and consist of α-Zr. The sintering of zirconium powders is carried out mainly by pressure…”
Get full text

The Influence of Various Welding Methods on the Microstructure and Mechanical Properties of 316Ti Steel by Noga, Piotr, Skrzekut, Tomasz, Wędrychowicz, Maciej, Węglowski, Marek St, Wiewióra, Marcel

“…Austenitic stainless steels are very popular due to their high strength properties, ductility, excellent corrosion resistance and work hardening. This paper…”
Get full text

Determining the Mechanical Properties of Solid Plates Obtained from the Recycling of Cable Waste by Wędrychowicz, Maciej, Papacz, Władysław, Walkowiak, Janusz, Bydałek, Adam, Piotrowicz, Andrzej, Skrzekut, Tomasz, Kurowiak, Jagoda, Noga, Piotr, Kostrzewa, Mirosław

“…In this article, the possibility of obtaining a solid plate from waste cable sheaths, by mechanical recycling, i.e., grinding, plasticising and pressing, is…”
Get full text

The Extrusion and SPS of Zirconium–Copper Powders and Studies of Selected Mechanical Properties by Skrzekut, Tomasz, Boczkal, Grzegorz, Zwoliński, Adam, Noga, Piotr, Jaworska, Lucyna, Pałka, Paweł, Podsiadło, Marcin

“…Zr-2.5Cu and Zr-10Cu powder mixtures were consolidated in the extrusion process and using the spark plasma sintering technique. In these studies, material…”
Get full text

The Pressure Compaction of Zr-Nb Powder Mixtures and Selected Properties of Sintered and KOBO-Extruded Zr-xNb Materials by Jaworska, Lucyna, Skrzekut, Tomasz, Stępień, Michał, Pałka, Paweł, Boczkal, Grzegorz, Zwoliński, Adam, Noga, Piotr, Podsiadło, Marcin, Wnuk, Radosław, Ostachowski, Paweł

“…Materials were obtained from commercial zirconium powders. 1 mass%, 2.5 mass% and 16 mass% of niobium powders were used as the reinforcing phase. The SPS…”
Get full text

Preparation and testing of microstructure of the SPS zirconium with the addition of manganese by Panasiuk, Justyna, Noga, Piotr, Jaworska, Lucyna, Skrzekut, Tomasz, Onderka, Bogusław, Pałka, Paweł, Podsiadło, Marcin, Putyra, Piotr, Stępień, Michał

“…The research concerns the optimisation of sintering zirconium by spark plasma sintering (SPS) and modification of microstructures by introducing the manganese…”
Get full text

High-strength and thermally stable Al – CeO2 composite produced by means of mechanical alloying by Skrzekut, Tomasz, Kula, Anna, Blaz, Ludwik, Wloch, Grzegorz, Sugamata, Makoto

“…The effect of temperature on both mechanical and structural features of a new Al-based metallic composite reinforced with fine CeO particles was the primary…”
Get full text

High-strength and thermally stable Al – CeO 2 composite produced by means of mechanical alloying by Skrzekut, Tomasz, Kula, Anna, Blaz, Ludwik, Wloch, Grzegorz, Sugamata, Makoto

“…The effect of temperature on both mechanical and structural features of a new Al-based metallic composite reinforced with fine CeO 2 particles was the primary…”
Get full text

High-strength and thermally stable Al - CeO sub(2) composite produced by means of mechanical alloying by Skrzekut, Tomasz, Kula, Anna, Blaz, Ludwik, Wloch, Grzegorz, Sugamata, Makoto

“…The effect of temperature on both mechanical and structural features of a new Al-based metallic composite reinforced with fine CeO sub(2) particles was the…”
Get full text