Search Results - "Paula, Andersan"

Processing and Characterization of PET Composites Reinforced With Geopolymer Concrete Waste by Pereira, Ana Paula dos Santos, Silva, Marcelo Henrique Prado da, Lima Júnior, Édio Pereira, Paula, Andersan dos Santos, Tommasini, Flávio James

“…In the present study, poly (ethylene terephthalate)-based composites were produced and characterized. These composites were composed by poly (ethylene…”
Get full text

Structural Characterization of the Rolled and Annealed 7475 Aluminum Alloy by Diniz, Saulo Brinco, dos Santos Paula, Andersan, Brandão, Luiz Paulo Mendonça

“…Aluminum alloys have been extensively employed in industrial applications due, among other things, to low cost and small weight. The purpose of this work was…”
Get full text

Investigation of the Effect of Milling Time on Elemental Powders of Oxi‐Reduction Nickel and Hydrogenation–Dehydrogenation Titanium by da Silva Teixeira, Rodolfo, Magalhães Gurgel, Mônica Aline, Freitas Rodrigues, Patrícia, Xavier de Freitas, Bruno, Vieira Le Sénéchal, Naiara, Vieira de Oliveira, Rebeca, Carlos Figueiredo Pereira Neves, Filipe, dos Santos Paula, Andersan

“…Mechanical alloying (MA) is widely applied in the synthesis of blended elemental or prealloyed powders. This work evaluates the effect of milling time on…”
Get full text

The Influence of the Soaking Temperature Rotary Forging and Solution Heat Treatment on the Structural and Mechanical Behavior in Ni-Rich NiTi Alloy by Freitas Rodrigues, Patrícia, Teixeira, Rodolfo S, Le Sénéchal, Naiara V, Braz Fernandes, Francisco Manuel, Paula, Andersan S

“…The structural and thermophysical characteristics of an Ni-rich NiTi alloy rod produced on a laboratory scale was studied. The soak temperature of the solution…”
Get full text

Microwave versus Conventional Sintering of NiTi Alloys Processed by Mechanical Alloying by da Silva Teixeira, Rodolfo, Oliveira, Rebeca, Freitas Rodrigues, Patricia, Mascarenhas, João, Neves, Filipe, dos Santos Paula, Andersan

“…The present study shows a comparison between two sintering processes, microwave and conventional sintering, for the manufacture of NiTi porous specimens…”
Get full text

Residual Stress Analysis After the Induced Martensitic Transformation by Rolling and Tensile Test in the 304L TRIP Steel by Alves, Juciane Maria, Paula, Andersan dos Santos, Brandao, Luiz Paulo

“…In this work, the residual stress study by XRD was carried out after martensitic transformation of a 304L steel subjected to plastic strain by rolling and…”
Get full text

Damage identification parameters of dual-phase 600–800 steels based on experimental void analysis and finite element simulations by Santos, Rafael Oliveira, da Silveira, Lílian Barros, Moreira, Luciano Pessanha, Cardoso, Marcelo Costa, da Silva, Fabiane Roberta Freitas, dos Santos Paula, Andersan, Albertacci, Daniel Abbott

“…In this work, the damage behavior of cold-rolled zinc-coated dual-phase steel sheets 600 and 800 grades was evaluated by means of standard uniaxial tensile…”
Get full text

Mechanically Induced Martensitic Transformation of Hot Rolled and Annealed 304L Austenitic Stainless Steel at Room and Cryogenic Temperatures by Alves, Juciane Maria, Brandão, Luiz Paulo, Paula, Andersan dos Santos

“…The 304L austenitic stainless steel is susceptible to mechanically induced martensitic transformation from slightly above room temperature down to cryogenic…”
Get full text

Corrigendum to “Grain ejection associated with thermocycling of Cu-Al-Ni shape memory alloy” [Mater. Lett. 210 (2018) 54–57] by Pereira, Elaine Cristina, Matlakhova, Lioudmila Aleksandrovna, da Silva Figueiredo, André Ben-Hur, Lima, Eduardo Sousa, dos Santos Paula, Andersan, Monteiro, Sergio Neves

Get full text

High temperature work hardening stages, dynamic strain aging and related dislocation structure in tensile deformed AISI 301 stainless steel by Monteiro, Sergio Neves, Nascimento, Lucio Fabio Cassiano, Simonassi, Noan Tonini, Lima, Eduardo Sousa, Paula, Andersan Santos de, Braga, Fabio de Oliveira

“…The development of dislocation structures associated with work hardening stages and dynamic strain aging (DSA) is investigated in an AISI 301 austenitic…”
Get full text

Microstructure and Continuous Cooling Transformation of an Fe-7.1Al-0.7Mn-0.4C-0.3Nb Alloy by Gurgel, Mônica Aline Magalhães, de Souza Baêta Júnior, Eustáquio, da Silva Teixeira, Rodolfo, do Nascimento, Gabriel Onofre, Oliveira, Suzane Sant’Ana, Ferronatto Leite, Duílio Norberto, Moreira, Luciano Pessanha, Brandao, Luiz Paulo, dos Santos Paula, Andersan

“…Reducing pollutant emissions and improving safety standards are primary targets for modern mobility improvement. To meet these needs, the development of…”
Get full text

Grain ejection associated with thermocycling of Cu-Al-Ni shape memory alloy by Pereira, Elaine Cristina, Mathlakova, Lioudmila Aleksandrovna, da Silva Figueiredo, André Ben-Hur, Lima, Eduardo Sousa, dos Santos Paula, Andersan, Monteiro, Sergio Neves

“…•A recently discovered phenomenon of grain ejection is for the first time explained.•In CuAlNi alloy, the first ejected grain was observed after 400 load-free…”
Get full text

Creep Fracture Mechanisms and Maps in Aisi Type 316 Austenitic Stainless Steels from Distinct Origins by Monteiro, Sergio Neves, Brandão, Luiz Paulo Mendonça, Paula, Andersan dos Santos, Elias, Carlos Nelson, Pereira, Artur Camposo, Assis, Foluke Salgado de, Almeida, Luiz Henrique de, Araújo, Leonardo Sales

“…Two distinct AISI type 316 stainless steels, of Brazilian and Swedish origins, were compared regarding their creep fracture mechanisms at 600, 700 and 800°C…”
Get full text

On the mechanical behavior of an Al 7075 alloy deformed by asymmetrical and conventional rolling by Vale, Matheus Garcia do, Medeiros, Neil de, Fonseca, Gláucio Soares da, Diniz, Saulo Brinco, Paula, Andersan dos Santos, Brandão, Luiz Paulo Mendonça

“…ABSTRACT Samples of the Al 7075 naturally and artificially aged were processed by conventional and asymmetrical rolling with 5% of thickness reduction. The…”
Get full text

Recovery Mechanisms in a Compressed Ni-Ti Superelastic Alloy by Daer, Shimeni Baptista, Paula, Andersan, Vieira, Luiz Carlos Almeida, Teixeira, Edir Neves, Otubo, Jorge, Fernandes, Francisco Manuel Braz

“…The present work studied the influence of annealing on a Ni-Ti alloy submitted to uniaxial compression. The stress-strain curve under compression showed the…”
Get full text

Microstructural evaluation of an asymmetrically rolled and recrystallized 3105 aluminum alloy by Diniz, Saulo Brinco, Benatti, Emanuel Alejandro, dos Santos Paula, Andersan, Bolmaro, Raúl Eduardo, da Silva, Luis Celso, Meirelles, Bruna Godoi

“…This study evaluates the influence of the structural changes promoted by a solution heat treatment (ST) on recrystallization and grain growth during annealing…”
Get full text

Stability in Phase Transformation After Multiple Steps of Marforming in Ti-Rich Ni-Ti Shape Memory Alloy by dos Santos Paula, Andersan, Mahesh, Karimbi Koosappa, Braz Fernandes, Francisco Manuel

“…Nickel-titanium (Ni-Ti) alloys are the most attractive among shape memory alloys (SMA) due to their good functionality properties coupled with high strength…”
Get full text

Flow stress behavior, constitutive modeling, processing map and microstructure evolution in hot deformation of Fe-7.1Al-0.7Mn-0.4C-0.3Nb alloy by Magalhães Gurgel, Mônica Aline, Norberto Ferronatto Leite, Duílio, Pessanha Moreira, Luciano, Paula, Andersan dos Santos, de Souza Baêta Júnior, Eustáquio, da Silva Teixeira, Rodolfo, Brandao, Luiz Paulo

“…The automotive industry has experienced rapid growth, with lightweight materials becoming a significant research focus. Among these materials, low-density…”
Get full text

Adiabatic shear bands produced in a metallic armor, after dynamic compression with a Hopkinson pressure bar by Oliveira, Suzane de Sant’ Ana, Monsores, Karollyne Gomes de Castro, da Silva, Anderson Oliveira, Monteiro, Sergio Neves, Paula, Andersan dos Santos, Weber, Ricardo Pondé

“…A Brazilian high hardness armor (HHA) steel was, for the first time dynamically tested and microstructurally analyzed for the occurrence of shear bands. The…”
Get full text

Influence of Processing Parameters on Laser-Assisted Reactive Sintering of a Mixture of Ni and Ti Powders by Le Sénéchal, Naiara Vieira, da Silveira, Pedro Henrique Poubel Mendonça, Rodrigues, Patrícia Freitas, Gonçalves, Danilo Abílio Corrêa, Dyer, Silvelene Alessandra Silva, Teixeira, Rodolfo da Silva, de Siqueira, Rafael Humberto Mota, de Lima, Milton Sergio Fernandes, Bayerlein, Daniel Leal, Paula, Andersan dos Santos

“…Additive manufacturing (AM) plays a crucial role in the development of NiTi alloys, enabling the creation of complex and customized structures while optimizing…”
Get full text