Search Results - "Mauro Antônio de Arruda NÓBILO"

Refine Results
  1. 1
  2. 2

    Fatigue performance of joints executed in pure titanium structures with several diameters by NUÑEZ-PANTOJA, Juliana Maria Costa, VAZ, Luis Geraldo, Mauro Antônio de Arruda NÓBILO, MESQUITA, Marcelo Ferraz

    Published in Dental Materials Journal (2011)
    “…This study evaluated fatigue strength of CP-Ti laser-welded joints. Sixty (20/diameter) CP-Ti casted dumbbell rods with diameters of 1.5, 2.0, and 3.5 mm were…”
    Get full text
    Journal Article
  3. 3

    Evaluation of varying amounts of thermal cycling on bond strength and permanent deformation of two resilient denture liners by Ribeiro Pinto, José Renato, Mesquita, Marcelo Ferraz, de Arruda Nóbilo, Mauro Antônio, Elias Pessanha Henriques, Guilherme

    Published in The Journal of prosthetic dentistry (01-09-2004)
    “…Two problems found in prostheses with resilient liners are bond failure to the acrylic resin base and increased permanent deformation due to material aging…”
    Get full text
    Journal Article
  4. 4

    Influence of Crown-to-Implant Ratio on Stress Around Single Short-Wide Implants: A Photoelastic Stress Analysis by Sotto-Maior, Bruno Salles, Senna, Plinio Mendes, Silva-Neto, João Paulo da, de Arruda Nóbilo, Mauro Antônio, Cury, Altair Antoninha Del Bel

    Published in Journal of prosthodontics (01-01-2015)
    “…Purpose The aim of this study was to evaluate the photoelastic fringe patterns around two short‐wide implants supporting single crowns with different…”
    Get full text
    Journal Article
  5. 5

    Tensile and Flexural Strength of Commercially Pure Titanium Submitted to Laser and Tungsten Inert Gas Welds by Atoui, Juliana Abdallah, Felipucci, Daniela Nair Borges, Pagnano, Valeria Oliveira, Orsi, Iara Augusta, Nobilo, Mauro Antonio de Arruda, Bezzon, Osvaldo Luiz

    Published in Brazilian dental journal (01-12-2013)
    “…This study evaluated the tensile and flexural strength of tungsten inert gas (TIG) welds in specimens made of commercially pure titanium (CP Ti) compared with…”
    Get full text
    Journal Article
  6. 6

    Micro-leakage at the implant-abutment interface with different tightening torques in vitro by Silva-Neto, João Paulo da, Prudente, Marcel Santana, Carneiro, Thiago de Almeida Prado Naves, Nóbilo, Mauro Antônio de Arruda, Penatti, Mario Paulo Amante, Neves, Flávio Domingues das

    Published in Journal of applied oral science (01-10-2012)
    “…This study evaluated the microleakage at the implant/abutment interface of external hexagon (eH) implants and abutments with different amounts of bacteria and…”
    Get full text
    Journal Article
  7. 7

    Effect of Accelerated Aging on Permanent Deformation and Tensile Bond Strength of Autopolymerizing Soft Denture Liners by Takahashi, Jessica Mie Ferreira Koyama, Consani, Rafael Leonardo Xediek, Henriques, Guilherme Elias Pessanha, de Arruda Nóbilo, Mauro Antônio, Mesquita, Marcelo Ferraz

    Published in Journal of prosthodontics (01-04-2011)
    “…Purpose: The aim of this study was to evaluate the effect of different accelerated aging times on permanent deformation and tensile bond strength of two soft…”
    Get full text
    Journal Article
  8. 8
  9. 9

    Radiographic inspection of porosity in pure titanium dumbbell castings by Nuñez, Juliana Maria Costa, Takahashi, Jessica Mie Ferreira Koyama, Henriques, Guilherme Elias Pessanha, Nóbilo, Mauro Antônio de Arruda, Consani, Rafael Leonardo Xediek, Mesquita, Marcelo Ferraz

    Published in Gerodontology (01-09-2011)
    “…Radiographic inspection of porosity in pure titanium dumbbell castings Background:  Titanium frameworks are frequently indicated for implant supported…”
    Get full text
    Journal Article
  10. 10

    Prosthetic Improvement of Pronounced Buccally Positioned Zygomatic Implants: A Clinical Report by Bacchi, Ataís, dos Santos, Mateus Bertolini Fernandes, Pimentel, Marcele Jardim, Nóbilo, Mauro Antonio de Arruda, Consani, Rafael Leonardo Xediek

    Published in Journal of prosthodontics (01-08-2014)
    “…This report presents a prosthetic technique for the improvement of surgically positioned, buccally placed zygomatic implants with the use of custom abutments…”
    Get full text
    Journal Article
  11. 11

    Radiographic inspection of porosity in Ti-6Al-4V laser-welded joints by Nuñez-Pantoja, Juliana Maria Costa, Takahashi, Jessica Mie Ferreira Koyama, Nóbilo, Mauro Antônio de Arruda, Consani, Rafael Leonardo Xediek, Mesquita, Marcelo Ferraz

    Published in Brazilian oral research (01-03-2011)
    “…Widely used in dentistry, Ti-6Al-4V alloy is difficult to cast and solder, as it frequently exhibits pores inside the structure. This study was conducted to…”
    Get full text
    Journal Article
  12. 12

    Influence of prosthetic screw material on joint stability in passive and non-passive implant-supported dentures by Spazzin, Aloísio Oro, Henriques, Guilherme Elias Pessanha, de Arruda Nóbilo, Mauro Antônio, Consani, Rafael Leonardo Xediek, Correr-Sobrinho, Lourenço, Mesquita, Marcelo Ferraz

    Published in The open dentistry journal (30-12-2009)
    “…This study evaluated the influence of prosthetic screw material on joint stability in implantsupported dentures at two levels of fit. Ten mandibular…”
    Get full text
    Journal Article
  13. 13
  14. 14

    Evaluation of Anodic Behavior of Commercially Pure Titanium in Tungsten Inert Gas and Laser Welds by Augusta Orsi, Iara, Raimundo, Larica B., Luiz Bezzon, Osvaldo, Antonio de Arruda Nóbilo, Mauro, Kuri, Sebastião E., Rovere, Carlos Alberto D., Oliveira Pagnano, Valeria

    Published in Journal of prosthodontics (01-12-2011)
    “…Purpose: This study evaluated the resistance to corrosion in welds made with Tungsten Inert Gas (TIG) in specimens made of commercially pure titanium (cp Ti)…”
    Get full text
    Journal Article
  15. 15

    Vickers hardness of cast commercially pure titanium and Ti-6Al-4V alloy submitted to heat treatments by da Rocha, Sicknan Soares, Adabo, Gelson Luis, Henriques, Guilherme Elias Pessanha, Nóbilo, Mauro Antônio de Arruda

    Published in Brazilian dental journal (2006)
    “…The purpose of this study was to evaluate the effect of heat treatments on the Vickers hardness of commercially pure titanium and Ti-6Al-4V cast alloys…”
    Get full text
    Journal Article
  16. 16

    Photoelastic analysis of all-on-four concept using different implants angulations for maxilla by Cidade, Castelo Pedro Vemba, Pimentel, Marcele Jardim, Amaral, Regiane Cristina do, Nóbilo, Mauro Antonio de Arruda, Barbosa, José Ricardo de Albergaria

    Published in Brazilian oral research (2014)
    “…Conventional tilted implants are used in oral rehabilitation for heavily absorbed maxilla to avoid bone grafts; however, few research studies evaluate the…”
    Get full text
    Journal Article
  17. 17

    Effect of retorque on loosening torque of prosthetic screws under two levels of fit of implant-supported dentures by Spazzin, Aloísio Oro, Henrique, Guilherme Elias Pessanha, Nóbilo, Mauro Antônio de Arruda, Consani, Rafael Leonardo Xediek, Correr-Sobrinho, Lourenço, Mesquita, Marcelo Ferraz

    Published in Brazilian dental journal (01-01-2010)
    “…This study evaluated the influence of retorque on loosening torque (Lt) of prosthetic screws in implant-supported dentures with different fit levels. Ten…”
    Get full text
    Journal Article
  18. 18

    Stress Distribution in Co-Cr Implant Frameworks after Laser or TIG Welding by Castro, Gabriela Cassaro de, Araújo, Cleudmar Amaral de, Mesquita, Marcelo Ferraz, Consani, Rafael Leonardo Xediek, Nóbilo, Mauro Antônio de Arruda

    Published in Brazilian dental journal (01-04-2013)
    “…Lack of passivity has been associated with biomechanical problems in implant-supported prosthesis. The aim of this study was to evaluate the passivity of three…”
    Get full text
    Journal Article
  19. 19
  20. 20