Search Results - "Madhusudan Reddy, G."

Tool rotational speed variant response on the evolution of microstructure and its significance on mechanical properties of friction stir welded 9Cr-1Mo steel by D, Sunilkumar, S, Muthukumaran, M, Vasudevan, G, Madhusudan Reddy

“…[Display omitted] In this study, the effect of the tool rotational speed on the microstructure evolution and its significance on the mechanical properties of…”
Get full text

Optimization of friction stir welding parameters for improved corrosion resistance of AA2219 aluminum alloy joints by Rambabu, G., Balaji Naik, D., Venkata Rao, C.H., Srinivasa Rao, K., Madhusudan Reddy, G.

“…The aluminium alloy AA2219 （Al-Cu--Mg alloy） is widely used in the fabrication of lightweight structures with high strength-to-weight ratio and good corrosion…”
Get full text

Unveiling Liquation and Segregation Induced Failure Mechanism in Thick Dissimilar Aluminum Alloy Electron-Beam Welds by Mastanaiah, P., Reddy, G. Madhusudan, Bhattacharya, Anirban, Kapil, Angshuman, Sharma, Abhay

“…This study presents new findings on the underlying failure mechanism of thick dissimilar electron-beam (EB) welds through a study on the AA 2219-AA 5083 pair…”
Get full text

Metallurgical characteristics of armour steel welded joints used for combat vehicle construction by Magudeeswaran, G., Balasubramanian, V., Madhusudan Reddy, G.

“…Austenitic stainless steel (ASS) and High nickel steel (HNS) welding consumables are being used for welding Q&T steels, as they have higher solubility for…”
Get full text

Pressureless sintering of (ZrB2–SiC–B4C) composites with (Y2O3+Al2O3) additions by Krishnarao, R.V., Alam, Zafir, Das, D.K., Bhanu Prasad, V.V., Madhusudan Reddy, G.

“…Pressureless sintering of (ZrB2–SiC–B4C) composites with (Y2O3+Al2O3) additions has been studied. The vol.% of SiC, B4C, and (Y2O3+Al2O3) was varied from (26,…”
Get full text

Microstructure and mechanical properties of similar and dissimilar stainless steel electron beam and friction welds by Madhusudan Reddy, G., Srinivasa Rao, K.

“…Microstructure and mechanical properties of similar and dissimilar welds of austenitic stainless steel (AISI 304), ferritic stainless steel (AISI 430), and…”
Get full text

Joining and machining of (ZrB2-SiC) and (Cf-SiC) based composites by Krishnarao, R.V., Madhusudan reddy, G., Bhanuprasad, V.V.

“…Filler materials of (ZrB2-SiC-B4C-YAG) composite were developed for gas tungsten arc welding (GTAW) of the ZrB2-SiC and Cf-SiC based composites to themselves…”
Get full text

Effect of Friction Stir Welding on Pitting and Stress Corrosion Cracking Behavior of AFNOR7020-T6 Aluminium Alloy by Srinivasa Rao, G., Srinivasa Rao, K., Srinivasa Rao, P., Koteswara Rao, S. R., Madhusudan Reddy, G.

“…Present work mainly focused on the pitting and stress corrosion cracking behavior of AFNOR7020 aluminium alloy friction stir welds and compared those results…”
Get full text

Studies on partially melted zone in aluminium–copper alloy welds—effect of techniques and prior thermal temper by Rao, K. Srinivasa, Reddy, G. Madhusudan, Rao, K. Prasad

“…Partially melted zone (PMZ) of aluminium alloy welds is an important region and requires careful attention. This is mainly because PMZ in these materials is…”
Get full text

Effect of Tool Rotation Speed on Microstructure and Hardness of Friction-Stir-Welded 9Cr-1Mo Steel by Sunilkumar, D., Muthukumaran, S., Vasudevan, M., Paneer Selvi, S., Reddy, Madhusudan G.

“…In this study, friction stir welding (FSW) of 9Cr-1Mo steel was carried out with tungsten lanthanum oxide (W-La 2 O 3 ) tool to study the influence of tool…”
Get full text

Optimization of Friction Stir Welding Parameters to Improve Corrosion Resistance and Hardness of AA2219 Aluminum Alloy Welds by Balaji Naik, D., Venkata Rao, C.H., Srinivasa Rao, K., Madhusudan Reddy, G., Rambabu, G.

“…The aluminium alloy AA2219 (Al-Cu-Mg alloy) is widely used in the fabrication of lightweight structures with high strength-to-weight ratio and good corrosion…”
Get full text

Heat-affected zone softening in high-strength low-alloy steels by Mohandas, T, Madhusudan Reddy, G, Satish Kumar, B

“…The effect of the chemistry of the steel and the welding process on the softening of the heat affected zone has been investigated. It has been observed that a…”
Get full text

Effect of frequency of pulsing in gas tungsten arc welding on the microstructure and mechanical properties of titanium alloy welds : A technical note by MOHANDAS, T, MADHUSUDAN REDDY, G

“…The effect of variation in pulse frequency during gas tungsten arc welding on grain size and, in turn, on mechanical properties of the welded joints of…”
Get full text

Microstructure and Mechanical Properties Relationship of Friction Stir- and A-GTA-Welded 9Cr-1Mo to 2.25Cr-1Mo Steel by Sunilkumar, D., Muthukumaran, S., Vasudevan, M., Reddy, G. Madhusudan

“…Dissimilar weldment of 9Cr-1Mo (P9) to 2.25Cr-1Mo (P22) steel processed with fusion welding process must be subjected to post-weld heat treatment (PWHT) prior…”
Get full text

Influence of heat treatments on corrosion behavior of Ti64 friction welds by Vikas, K. Sri Ram, Rahul, Ramana, V.S.N. Venkata, Reddy, G. Madhusudan, Rao, K. Srinivasa

Get full text

Investigation of brazing of Ba(Zn0.33Ta0.67)O3 ceramic with Ti6Al4V alloy by Beera, Suresh, Manivannan, Swathi, Singh, Amit kumar, Sharma, P.K., Reddy, G. Madhusudan, Das, Dibakar

“…Feasibility of brazing Barium Zinc Tantalate (BZT) ceramics with Ti6Al4V alloy using active and non-active brazing alloy was investigated in the present study…”
Get full text

Friction stir welding of advanced high strength (bainitic) steels for automotive applications by Ramakrishna, R.V.S.M., Sankara Rao, K. Bhanu, Reddy, G. Madhusudan, Gautam, Jai Prakash

Get full text

Influence of Beam Power and Traverse Speed in Fibre Laser welding of Dual phase steel (590) on Depth of weld zone penetration, Microstructure and Hardness by Lakshminarayana, P.V.S., Gautam, Jai Prakash, Mastanaiah, P., Reddy, G. Madhusudan, Sankara Rao, K. Bhanu

Get full text