Search Results - "Kuzminova, Yulia"

Phase and structural changes during heat treatment of additive manufactured CrFeCoNi high-entropy alloy by Kuzminova, Yulia O., Kudryavtsev, Egor A., Han, Jae-Kyung, Kawasaki, Megumi, Evlashin, Stanislav A.

“…•Heating up to 600 °C leads to the polygonization process in the as-built CrFeCoNi alloy.•The recrystallization process occurs in the material at temperatures…”
Get full text

Structural evolution during nanostructuring of additive manufactured 316L stainless steel by high-pressure torsion by Han, Jae-Kyung, Liu, Xiaojing, Lee, Isshu, Kuzminova, Yulia O., Evlashin, Stanislav A., Liss, Klaus-Dieter, Kawasaki, Megumi

“…•Structural changes at nanostructuring are examined in a 3D-printed stainless steel.•A limited proof of martensite formation is observed after…”
Get full text

Effect of recycled powder content on the structure and mechanical properties of Ti-6Al-4V alloy produced by direct energy deposition by Shalnova, Svetlana A., Kuzminova, Yulia O., Evlashin, Stanislav A., Klimova-Korsmik, Olga G., Vildanov, Artur M., Shibalova, Anastasia A., Turichin, Gleb A.

“…•Ti-6Al-4V DED samples with different content of recycled powder demonstrated the stable chemical composition.•The tendency of decrease the α lath size with…”
Get full text

Anisotropy of Mechanical Properties and Residual Stress in Additively Manufactured 316L Specimens by Fedorenko, Alexey, Fedulov, Boris, Kuzminova, Yulia, Evlashin, Stanislav, Staroverov, Oleg, Tretyakov, Mikhail, Lomakin, Evgeny, Akhatov, Iskander

“…In the presented study, LPBF 316L stainless steel tensile specimens were manufactured in three different orientations for the analysis of anisotropy. The first…”
Get full text

Process Parameter Selection for Production of Stainless Steel 316L Using Efficient Multi-Objective Bayesian Optimization Algorithm by Chepiga, Timur, Zhilyaev, Petr, Ryabov, Alexander, Simonov, Alexey P, Dubinin, Oleg N, Firsov, Denis G, Kuzminova, Yulia O, Evlashin, Stanislav A

“…Additive manufacturing is a modern technique to produce parts with a complex geometry. However, the choice of the printing parameters is a time-consuming and…”
Get full text

The oxidation behavior of the CrFeCoNiAlx (x = 0, 1.0, and 5.0 wt%) high-entropy alloy synthesized with Al elemental powder via powder bed fusion technique at high temperatures by Kuzminova, Yulia O., Firsov, Denis G., Shibalova, Anastasia A., Evlashin, Stanislav A., Shishkovsky, Igor V., Dautov, Stanislav S.

“…High-entropy alloys (HEAs) are promoted as promising materials for various applications, including those dealing with high-temperatures. It requires…”
Get full text

Multilayer composite Ti-6Al-4 V/Cp-Ti alloy produced by laser direct energy deposition by Gushchina, Marina O., Kuzminova, Yulia O., Dubinin, Oleg N., Evlashin, Stanislav A., Vildanov, Arthur M., Klimova-Korsmik, Olga G., Turichin, Gleb A.

“…Titanium alloys are one of the most used materials in the medicine, aviation, and automotive industry. However, Ti alloys usually possess poor impact…”
Get full text

Hardening of Additive Manufactured 316L Stainless Steel by Using Bimodal Powder Containing Nanoscale Fraction by Filimonov, Aleksandr M, Rogozin, Oleg A, Firsov, Denis G, Kuzminova, Yulia O, Sergeev, Semen N, Zhilyaev, Alexander P, Lerner, Marat I, Toropkov, Nikita E, Simonov, Alexey P, Binkov, Ivan I, Okulov, Ilya V, Akhatov, Iskander S, Evlashin, Stanislav A

“…The particle size distribution significantly affects the material properties of the additively manufactured parts. In this work, the influence of bimodal…”
Get full text

Modification of Mechanical Properties in Directed Energy Deposition by a Static Magnetic Field: Experimental and Theoretical Analysis by Filimonov, Aleksandr M, Rogozin, Oleg A, Dubinin, Oleg N, Kuzminova, Yulia O, Shibalova, Anastasia A, Okulov, Ilya V, Akhatov, Iskander S, Evlashin, Stanislav A

“…The superimposed magnetic field affects the microstructure and mechanical properties of additively manufactured metal parts. In this work, the samples were…”
Get full text

Significance of grain refinement on micro-mechanical properties and structures of additively-manufactured CoCrFeNi high-entropy alloy by Zhao, Wenrui, Han, Jae-Kyung, Kuzminova, Yulia O., Evlashin, Stanislav A., Zhilyaev, Alexander P., Pesin, Alexander M., Jang, Jae-il, Liss, Klaus-Dieter, Kawasaki, Megumi

“…Grain refinement is an effective approach to improve mechanical properties of conventionally-manufactured high entropy alloys (HEAs). Additive manufacturing of…”
Get full text

CAD/CAM System for Additive Manufacturing with a Robust and Efficient Topology Optimization Algorithm Based on the Function Representation by Popov, Dmitry, Kuzminova, Yulia, Maltsev, Evgenii, Evlashin, Stanislav, Safonov, Alexander, Akhatov, Iskander, Pasko, Alexander

“…Additive manufacturing erases the distance between design ideas and finished parts. However, designers must use several software tools to use these advantages…”
Get full text

Environmentally Friendly Method of Silicon Recycling: Synthesis of Silica Nanoparticles in an Aqueous Solution by Bondareva, Julia V, Aslyamov, Timur F, Kvashnin, Alexander G, Dyakonov, Pavel V, Kuzminova, Yulia O, Mankelevich, Yuri A, Voronina, Ekaterina N, Dagesyan, Sarkis A, Egorov, Alexander V, Khmelnitsky, Roman A, Tarkhov, Michael A, Suetin, Nikolay V, Akhatov, Iskander S, Evlashin, Stanislav A

“…In future decades, tons of silicon waste will be produced from various sources, with no reliable recycling route. The transformation of bulk silicon into SiO2…”
Get full text

In Situ Neutron Diffraction Investigating Microstructure and Texture Evolution upon Heating of Nanostructured CoCrFeNi High‐Entropy Alloy by Liu, Xiaojing, Han, Jae-Kyung, Onuki, Yusuke, Kuzminova, Yulia O., Evlashin, Stanislav A., Kawasaki, Megumi, Liss, Klaus-Dieter

“…Herein, in situ temperature‐dependent neutron experiments investigate the microstructural evolution of additively and conventionally manufactured CoCrFeNi…”
Get full text

On the texture and strength of a 316L steel processed by powder bed fusion by Kuzminova, Yulia O., Evlashin, Stanislav A., Belyakov, Andrey N.

“…The developed microstructures and textures and their effect on the tensile behavior of a 316L austenitic stainless steel produced by powder bed fusion (PBF)…”
Get full text

Structural effect of low Al content in the in-situ additive manufactured CrFeCoNiAlx high-entropy alloy by Kuzminova, Yulia, Shibalova, Anastasia, Evlashin, Stanislav, Shishkovsky, Igor, Krakhmalev, Pavel

“…•In-situ L-PBF CrFeCoNiAlx alloy has the inhomogeneous element distribution.•The CrFeCoNiAlx alloy has a fully fcc structure according to XRD…”
Get full text

Effect of Scanning Strategy on Mechanical Properties of Ti-6Al-4V Alloy Manufactured by Laser Direct Energy Deposition by Gushchina, Marina O., Kuzminova, Yulia O., Kudryavtsev, Egor A., Babkin, Konstantin D., Andreeva, Valentina D., Evlashin, Stanislav A., Zemlyakov, Evgeniy V.

“…Direct energy deposition (DED) is an additive manufacturing method that allows repairing the broken parts and building the meter-scale samples. However, the…”
Get full text

In Situ Heating Neutron and X‐Ray Diffraction Analyses for Revealing Structural Evolution during Postprinting Treatments of Additive‐Manufactured 316L Stainless Steel by Kawasaki, Megumi, Han, Jae-Kyung, Liu, Xiaojing, Onuki, Yusuke, Kuzminova, Yulia O., Evlashin, Stanislav A., Pesin, Alexander M., Zhilyaev, Alexander P., Liss, Klaus-Dieter

“…Herein, lab‐scale X‐ray diffraction and in situ heating neutron diffraction analyses for evaluating the structural changes at postprinting nanostructuring and…”
Get full text

Effects of the quality of pre-consolidated materials on the mechanical properties and morphology of thermoplastic pultruded flat laminates by Minchenkov, Kirill, Vedernikov, Alexander, Kuzminova, Yulia, Gusev, Sergey, Sulimov, Artem, Gulyaev, Artem, Kreslavskaya, Anastasia, Prosyanoy, Ilya, Xian, Guijun, Akhatov, Iskander, Safonov, Alexander

“…Pre-consolidated tapes in thermoplastic pultrusion solve the problem of impregnating a reinforcement with high-viscosity thermoplastic resins. Thermoplastic…”
Get full text

In Situ Heating Neutron and X‐Ray Diffraction Analyses for Revealing Structural Evolution during Postprinting Treatments of Additive‐Manufactured 316L Stainless Steel by Kawasaki, Megumi, Han, Jae-Kyung, Liu, Xiaojing, Onuki, Yusuke, Kuzminova, Yulia O., Evlashin, Stanislav A., Pesin, Alexander M., Zhilyaev, Alexander P., Liss, Klaus-Dieter

“…This report demonstrates, for the first time, structural evolution during nano structuring by severe plastic deformation and comprehensive structural…”
Get full text

The oxidation behavior of the CrFeCoNiAl x (x = 0, 1.0, and 5.0 wt%) high-entropy alloy synthesized with Al elemental powder via powder bed fusion technique at high temperatures by Kuzminova, Yulia O, Firsov, Denis G, Shibalova, Anastasia A, Evlashin, Stanislav A, Shishkovsky, Igor V, Dautov, Stanislav S

“…High-entropy alloys (HEAs) are promoted as promising materials for various applications, including those dealing with high-temperatures. It requires…”
Get full text