Search Results - "Kuang, S. J"

Refine Results
  1. 1

    Exterior RC Wide Beam–Column Connections: Effect of Spandrel Beam on Seismic Behavior by Behnam, Hamdolah, Kuang, J. S

    “…AbstractThis paper presents the results of a set of experiments performed on four large-scale exterior wide beam–column connections. The beam and column…”
    Get full text
    Journal Article
  2. 2

    Predicting Shear Strength of Reinforced Concrete Knee Joints in Closing and Opening Actions by Mogili, Srinivas, Kuang, J. S, Hwang, Shyh-Jiann

    “…AbstractThe shear capacity of reinforced concrete knee joints in closing and opening actions are determined in this paper using the framework of the softened…”
    Get full text
    Journal Article
  3. 3

    Predicting Strength of Exterior Wide Beam–Column Joints for Seismic Resistance by Huang, Roy Y. C, Kuang, J. S

    “…AbstractAn analytical model for predicting the strengths of exterior reinforced concrete wide beam-column joints is developed in this paper. In the proposed…”
    Get full text
    Journal Article
  4. 4

    Eight-node membrane element with drilling degrees of freedom for analysis of in-plane stiffness of thick floor plates by Zhang, Hexin, Kuang, J. S.

    “…The development of eight‐node arbitrary quadrilateral membrane elements with drilling degrees of freedom is presented using the compatible displacement…”
    Get full text
    Journal Article
  5. 5

    Eight-node Reissner-Mindlin plate element based on boundary interpolation using Timoshenko beam function by Zhang, Hexin, Kuang, J. S.

    “…A new eight‐node Reissner–Mindlin plate element is developed with a special interpolation within the element. This special interpolation is an extension of the…”
    Get full text
    Journal Article
  6. 6

    An extracellular matrix culture system for induced pluripotent stem cells derived from human dental pulp cells by Chen, Y, Zheng, Y-L, Qiu, D-B, Sun, Y-P, Kuang, S-J, Xu, Y, He, F, Gong, Y-H, Zhang, Z-G

    “…Induced pluripotent stem cells (iPSCs) have emerged as a promising tool for treating incurable diseases. The current challenges are to avoid potential…”
    Get more information
    Journal Article
  7. 7

    Surface chemical states of barium zirconate titanate thin films prepared by chemical solution deposition by Jiang, L.L., Tang, X.G., Kuang, S.J., Xiong, H.F.

    Published in Applied surface science (15-08-2009)
    “…Ba(Zr 0.05Ti 0.95)O 3 (BZT) thin films grown on Pt/Ti/SiO 2/Si(1 0 0) substrates were prepared by chemical solution deposition. The structural and surface…”
    Get full text
    Journal Article
  8. 8

    Spectrum-based pushover analysis for estimating seismic demand of tall buildings by Liu, Yang, Kuang, J. S.

    Published in Bulletin of earthquake engineering (01-10-2017)
    “…A quick and accurate estimate of the seismic demand of tall buildings is one of the important issues in the seismic evaluation of buildings. Nonlinear…”
    Get full text
    Journal Article
  9. 9

    Parametric finite element analysis of RC wide beam-column connections by Behnam, Hamdolah, Kuang, J.S., Samali, Bijan

    Published in Computers & structures (01-08-2018)
    “…This paper presents the finite element analysis (FEA) of reinforced concrete wide beam-column connections using the theoretical context of the concrete damaged…”
    Get full text
    Journal Article
  10. 10

    Estimating seismic demands of singly symmetric buildings by spectrum-based pushover analysis by Liu, Yang, Kuang, J. S.

    Published in Bulletin of earthquake engineering (01-04-2019)
    “…Buildings with the singly symmetric plan are more vulnerable to earthquake actions than the buildings with a symmetric-plan arrangement since the torsional…”
    Get full text
    Journal Article
  11. 11

    Predicting shear strength of RC interior beam–column joints by modified rotating-angle softened-truss model by Wong, H.F., Kuang, J.S.

    Published in Computers & structures (01-03-2014)
    “…•The modified rotating-angle softened-truss model (MRA-STM) is presented.•MRA-STM with the deep-beam analogy is used to analyse RC interior beam–column…”
    Get full text
    Journal Article
  12. 12

    Modal‐based ground motion selection procedure for nonlinear response time history analysis of high‐rise buildings by Liu, Yang, Kuang, J.S., Yuen, Terry Y.P.

    “…Summary The selection of representative input ground motions (IGMs) is important for a proper nonlinear response time history analysis (NLRHA) of modern…”
    Get full text
    Journal Article
  13. 13

    quick and efficient approach for gene silencing by using triple putative microRNA-based short hairpin RNAs by Shan, Z. X, Lin, Q. X, Yang, M, Deng, C. Y, Kuang, S. J, Zhou, Z. L, Xiao, D. Z, Liu, X. Y, Lin, S. G, Yu, X. Y

    Published in Molecular and cellular biochemistry (01-03-2009)
    “…The RNA interference (RNAi) technique has been widely used in gene function studies. It is typical to screen for effective siRNAs by knocking down targeted…”
    Get full text
    Journal Article
  14. 14

    Shear Strength of Exterior Wide Beam-Column Joints with Different Beam Reinforcement Ratios by Huang, Roy Y.C., Kuang, J.S., Behnam, Hamdolah

    Published in Journal of earthquake engineering : JEE (16-04-2021)
    “…Full-scale exterior reinforced concrete wide beam-column joints with beam reinforcement ratios of 0.84%, 1.07% and 1.28% were tested under reversed cyclic…”
    Get full text
    Journal Article
  15. 15

    AI-powered inspections of facades in reinforced concrete buildings by De Filippo, Michele, Asadiabadi, Sasan, Kuang, J S, Mishra, Dhanada K, Sun, Harris

    “…Worldwide there are plenty of aged Reinforced Concrete (RC) buildings in need of thorough inspections. Cracks, delamination, stains, leakages, debonding and…”
    Get full text
    Journal Article
  16. 16

    Effects of beam–column geometry and eccentricity on seismic behaviour of RC beam–column knee joints by Mogili, Srinivas, Kuang, J. S., Huang, Roy Y. C.

    Published in Bulletin of earthquake engineering (01-05-2019)
    “…The seismic behaviour of reinforced concrete beam–column knee joints is more complex than the conventional interior and exterior joints due to significantly…”
    Get full text
    Journal Article
  17. 17

    Automated assessment of reinforced concrete slabs using a pseudo-lower bound method: Case studies by De Filippo, Michele, Kuang, J S

    “…Despite the widespread usage of reinforced concrete slabs in construction industry, nowadays disasters due to sudden failure of such structures still occur…”
    Get full text
    Journal Article
  18. 18

    Topology optimization of multi-material structures with elastoplastic strain hardening model by Li, Mengxiao, Deng, Yu, Zhang, Hexin, Wong, Simon H. F., Mohamed, Ahmed, Zheng, Yu, Gao, Jiaxiang, Yuen, Terry Y. P., Dong, Biqin, Kuang, J. S.

    “…The paper presents a new multi-material topology optimization method with a novel adjoint sensitivity analysis that can accommodate not only multiple…”
    Get full text
    Journal Article
  19. 19

    Reversed cyclic performance of reinforced concrete knee joints under variable closing and opening stresses by Mogili, Srinivas, Kuang, J.S.

    Published in Engineering structures (01-01-2019)
    “…•Experimental cyclic loading tests on six knee joint sub-assemblages are conducted.•Specimens are designed to produce varying closing and opening joint…”
    Get full text
    Journal Article
  20. 20

    Equivalent frame analysis for effective wall width of nonplanar beam–wall connections by Behnam, Hamdolah, Kuang, J. S., Huang, Qunxian

    “…Summary Shear wall–frame structural systems are the most commonly used structural forms in tall buildings. In this structural system, many nonplanar beam–wall…”
    Get full text
    Journal Article