Search Results - "Icin, Kursat"

A comparative study of the correlation among the phase formation, crystal stability and magnetic properties of SrFe12-xMxO19 (M=Al3+, Cr3+ and Mn3+, x=0–0.5) ferrite permanent magnets by Icin, Kürşat, Akyol, Selmine, Alptekin, Furkan, Yıldız, Ataberk, Sünbül, Sefa Emre, Ergin, İbrahim, Öztürk, Sultan

“…The aim of this study is to enhance the magnetic and thermal properties of strontium hexaferrites by substituted with Al, Cr, and Mn ions instead of Fe, and to…”
Get full text

Microstructure, wear and oxidation behavior of AlCrFeNiX (X = Cu, Si, Co) high entropy alloys produced by powder metallurgy by Erdogan, Azmi, Sunbul, Sefa Emre, Icin, Kursat, Doleker, Kadir Mert

“…AlCrFeNiX (X = Cu, Si, Co) high entropy alloys (HEAs) were produced by mechanical alloying and sintering. The effects of the “X" additive on the…”
Get full text

A comparative study on the surface degradation mechanisms of arc melted and laser remelted CoCrFeNiAl0.5Nb0.5 HEA by Icin, Kursat, Sunbul, Sefa Emre, Erdogan, Azmi, Doleker, Kadir Mert

“…In the current study, a CoCrFeNiAl0.5Nb0.5 high entropy alloy was manufactured via arc melting and exposed to laser surface remelting. The presence of Nb and…”
Get full text

Effect of Co, Cu, and Mo alloying metals on electrochemical and magnetic properties of Fe-B alloy by Sunbul, Sefa Emre, Akyol, Selmine, Onal, Suat, Ozturk, Sultan, Sozeri, Huseyin, Icin, Kursat

“…FeB-based alloys were successfully produced by the vacuum arc melting method. FeB-based alloys with various compositions were obtained by the gradual addition…”
Get full text

Wear, corrosion and oxidation characteristics of consolidated and laser remelted high entropy alloys manufactured via powder metallurgy by Kafali, Mertcan, Doleker, Kadir Mert, Erdogan, Azmi, Sunbul, Sefa Emre, Icin, Kursat, Yildiz, Ataberk, Gok, Mustafa Sabri

“…High entropy alloys have promising wear, oxidation, and corrosion properties compared to conventional alloys and superalloys. In the present study,…”
Get full text

Boriding effect on CrFeMnNbNi high entropy alloy: Microstructure, micro-nano properties, wear behaviour by Atam, Dilara, Sunbul, Sefa Emre, Icin, Kursat, Döleker, Kadir Mert, Gök, Mustafa Sabri, Erdoğan, Azmi

“…This study is dedicated to determine the effect of boriding treatment on CrFeMnNbNi alloy. Three phases (Laves, FeNi, FeCr) were determined in the HEA…”
Get full text

Powder-pack boronizing of CoCrFeNiAl0.5Nb0.5 HEA: Modeling of kinetics, microstructural, mechanical, and tribological characterizations by Gunen, Ali, Keddam, Mourad, Sunbul, Sefa Emre, Icin, Kursat, Doleker, Kadir Mert, Gok, Mustafa Sabri, Dal, Serkan, Erdogan, Azmi

“…This study is dedicated to the detailed investigation of boronization kinetic, microstructural, mechanical, and wear properties of high entropy alloys (HEAs)…”
Get full text

Investigation of phase transformation related magnetic properties of Ti addition to FeCoCuNiMn and FeCoCuNiAl high entropy alloys by vacuum arc melting by Için, Kürşat

“…The motivation for the present work is to explain the ferromagnetic properties of Cantor high entropy alloy by adding an alternative metal atom instead of Cr,…”
Get full text

Theoretical and experimental study of the titanium substituted Mg2-xTixNi alloys and Mg2-xTixNiH4 hydrides by Sunbul, Sefa Emre, Icin, Kursat, Mamula, Bojana Paskaš, Radaković, Jana, Ozturk, Sultan, Batalović, Katarina

“…The formation of the Ti substituted Mg2Ni alloys, a promising hydrogen storage material for various applications is studied in detail. Mg1.95Ti0.05Ni alloy and…”
Get full text

Effect of titanium addition on the corrosion behavior of CoCuFeNiMn high entropy alloy by Öztürk, Sultan, Alptekin, Furkan, Önal, Suat, Sünbül, Sefa Emre, Şahin, Ömer, İçin, Kürşat

“…In this study, the effect of Ti addition on microstructure and corrosion properties of high entropy CoCuFeNiMnTix (x = 0.0–0.5) produced by the vacuum arc…”
Get full text

Effect of Sn addition on mechanical, wear, and electrochemical properties of Ti-Al-Sn alloys by Gölbaşı, Zafer, Öztürk, Bülent, İçin, Kürşat, Sünbül, Sefa Emre

“…This study aims to investigate the effect of Sn content on the structural, mechanical, wear, and electrochemical properties of Ti-6Al-xSn (x = 3.5–17.5, wt%)…”
Get full text

Mechanical, wear and corrosion behavior of Ti–6Al–xNb (x = 3.5–21 wt%) alloys manufactured by powder metallurgy by Gölbaşı, Zafer, Öztürk, Bülent, Sünbül, Sefa Emre, İçin, Kürşat

“…In this study, Ti–6Al–xNb alloys with different Nb percentages (x = 3.5–21 wt%) were produced by the conventional powder metallurgy technique. After mixing and…”
Get full text

Improvement of microstructure, tribology and corrosion characteristics of nickel-aluminum bronze by P/M method by Öztürk, Sultan, Sünbül, Sefa Emre, Metoğlu, Abdurrahim, İÇİN, Kürşat

“…In the present study, we have produced CuAl10Ni5Fe4 alloy powders by using the planar flow casting method. The microstructure, wear response, and corrosion…”
Get full text

Effect of heat treatment process on the structural and soft magnetic properties of Fe38Co38Mo8B15Cu ribbons by Öztürk, Sultan, İçin, Kürşat, Gençtürk, Merve, Göbülük, Metin, Svec, Peter

“…In this study, the effect of crystal formation, grain growth and surface properties on magnetic properties via changed with heat treatment process in amorphous…”
Get full text

Investigation of nano-crystaline strontium hexaferrite magnet powder from mill scale waste by the mechanochemical synthesis: Effect of the annealing temperature by Için, Kürşat, Öztürk, Sultan, Çakıl, Damla Dilara, Sünbül, Sefa Emre, Ergin, İbrahim, Özçelik, Bekir

“…Today, waste management and recycling have critical importance given the dwindling natural resources and to create powerful technologies for a green future…”
Get full text

Investigation and characterization of high purity and nano-sized SrCO3 production by mechanochemical synthesis process by Için, Kürşat, Öztürk, Sultan, Sünbül, Sefa Emre

“…In this study, the production of strontium carbonate (SrCO3) from concentrated celestite ore (SrSO4) by mechanochemical synthesis process was investigated…”
Get full text

Effect of the stoichiometric ratio on phase evolution and magnetic properties of SrFe12O19 produced with mechanochemical process using mill scale by İçi̇n, Kürşat, Öztürk, Sultan, Çakil, Damla Dilara, Sünbül, Sefa Emre

“…In this study, we have produced strontium hexaferrite (SrFe12O19) magnets by mechanochemically synthesizing the mill scale which is the waste material from the…”
Get full text

Determination of structural, tribological, isothermal oxidation and corrosion properties of Al–Co–Cr–Fe–Ni–Ti–Cu high-entropy alloy by Sünbül, Sefa Emre, İçi̇n, Kürşat, Şeren, Fatma Zehra, Şahin, Ömer, Çakil, Damla Dilara, Sezer, Raşit, Öztürk, Sultan

“…In the present work, Al10Co24Cr10Fe15Ni34Ti6Cu1 (at.%) was obtained high entropy alloy (HEA) with vacuum arc melting. The microstructure, tribological…”
Get full text

Effects of melt spinning process parameters and wheel surface quality on production of 6060 aluminum alloy powders and ribbons by ÖZTÜRK, Sultan, SÜNBÜL, Sefa Emre, İCİN, Kürşat

“…The aim of this study is to investigate the surface quality of the melt spinning wheel, which was changed from smooth type to textured structure, to atomize…”
Get full text

Effect of the Mn Amount on the Structural, Thermal, and Magnetic Properties of Rapidly Solidified (87-x)Cu-13Al-xMn (wt.%) Alloy Ribbons by Sünbül, Sefa Emre, İçin, Kürşat, Eroğlu, Murat, Öztürk, Sultan

“…In this study, rapidly solidified Cu-Al-Mn ribbons containing 13% Al and 1-14% Mn alloying element by weight were produced by melt spinning method. The…”
Get full text