Search Results - "Hanon, Muammel M."

Effect of print orientation and bronze existence on tribological and mechanical properties of 3D-printed bronze/PLA composite by Hanon, Muammel M., Alshammas, Yazan, Zsidai, László

“…In this work, fused deposition modeling (FDM) technology is employed for manufacturing tribological and tensile testing specimens. The test pieces are…”
Get full text

Prediction of Friction Coefficient for Ductile Cast Iron Using Artificial Neural Network Methodology Based on Experimental Investigation by Khalaf, Ahmad A., Hanon, Muammel M.

“…The key objective of the present study is to analyze the friction coefficient and wear rate for ductile cast iron. Three different microstructures were chosen…”
Get full text

Effect of Different Standard Geometry Shapes on the Tensile Properties of 3D-Printed Polymer by Faidallah, Rawabe Fatima, Hanon, Muammel M, Vashist, Varun, Habib, Ahmad, Szakál, Zoltán, Oldal, István

“…This study presents a comparative analysis of the tensile properties of 3D-printed polymer specimens with different standard geometry shapes. The objective is…”
Get full text

Determination of Kinetic Parameters for the Thermal Decomposition of Parthenium hysterophorus by Dhaundiyal, Alok, Singh, Suraj B., Hanon, Muammel M., Rawat, Rekha

“…A kinetic study of pyrolysis process of Parthenium hysterophorous is carried out by using thermogravimetric analysis (TGA) equipment. The present study…”
Get full text

Tribological Properties of Medical Material (MED610) Used in 3D Printing PJM Technology by Rudnik, Mateusz, Hanon, Muammel M, Szot, Wiktor, Beck, Karolina, Gogolewski, Damian, Zmarzly, Pawel, Kozior, Tomasz

“…The development of modern manufacturing technologies related to the ongoing industrial revolution Industry 4.0, is largely related to the dynamic development…”
Get full text

Design and performance evaluation of bevameter equipment by Nihal D. SALMAN, György PILLINGER, Muammel. M. HANON, Péter KISS

“…The depth of tilting in agricultural soil is 30–40 cm, which approximates the equivalent contact diameter of tires for the off-road vehicle. The soil thus…”
Get full text

Influence of Exposure Parameters on Nanoliquid-Assisted Glass Drilling Process Using CO2 Laser by Mahdi, Mohaimen Najah, Issa, Ahmed, Hasan, Hala Salman, Al-Hamaoy, Ahmed R., Hanon, Muammel M.

“…Liquid-assisted laser processing (LALP) is implemented using a 10.6 μm continuous-wave (CW) CO2 laser to drill holes in 1.1 mm thick soda-lime glass substrates…”
Get full text

A Modified Pressure–Sinkage Model for Studying the Effect of a Hard Layer in Sandy Loam Soil by Salman, Nihal D., Pillinger, György, Hanon, Muammel M., Kiss, Péter

“…The applicability of the typical pressure–sinkage models used to characterize the soil’s bearing properties is limited to homogeneous soils (infinite…”
Get full text

Clayton Copula as an Alternative Perspective of Multi-Reaction Model by Dhaundiyal, Alok, Singh, Suraj B., Hanon, Muammel M., Schrempf, Norbert

“…This study proposes to assess the effect of some relevant parameters of biomass pyrolysis on the numerical solutions of n order distributed activation energy…”
Get full text

Tribological characteristics of digital light processing (DLP) 3D printed graphene/resin composite: Influence of graphene presence and process settings by Hanon, Muammel M., Ghaly, Arsany, Zsidai, László, Klébert, Szilvia

“…[Display omitted] •Tribological testing of 3D printed graphene/polymer composites.•Determination of graphene effect on the friction and wear…”
Get full text

Influence of the 3D Printing Process Settings on Tensile Strength of PLA and HT-PLA by Hanon, Muammel M., Marczis, Róbert, Zsidai, László

“…Fused Deposition Modelling (FDM) is presently the most common utilized 3D printing technology. Since this printing technology makes the bodies anisotropic,…”
Get full text

Comprehending the role of process parameters and filament color on the structure and tribological performance of 3D printed PLA by Hanon, Muammel M., Zsidai, László

“…The recent growth of 3D printing has prompted researchers to investigate the reliability of its products in numerous implementations. However, 3D printed…”
Get full text

Impact of 3D-printing structure on the tribological properties of polymers by Hanon, Muammel M, Marczis, Róbert, Zsidai, László

“…Purpose The purpose of this paper is to examine the impact of three-dimensional (3D)-printing process settings (particularly print orientation) on the…”
Get full text

Tribology behaviour investigation of 3D printed polymers by Hanon, Muammel M, Kovács, Márk, Zsidai, László

“…3D printing of Acrylonitrile Butadiene Styrene (ABS) and Poly Lactic Acid (PLA) were used to prepare specimens utilising fused deposition modelling (FDM)…”
Get full text

Calculation of Kinetic Parameters of the Thermal Decomposition of Residual Waste of Coniferous Species: Cedrus Deodara by Dhaundiyal, Alok, Hanon, Muammel M.

“…This paper deals with pyrolysis decomposition of Cedrus deodara leaves with the help of thermogravimetric analysis (TGA). Experiments are performed in the…”
Get full text

Threshold investigation of shell thickness for enhanced mechanical and tribological performance in 3D-printed curved sandwich structures by Dobos, József, Hanon, Muammel M., Keresztes, Róbert Zsolt, Oldal, István

“…Global prominence has been attained by additive manufacturing technology in recent years, driven by its environmental benefits and machining advantages when…”
Get full text

Compressive and bending properties of 3D-printed wood/PLA composites with Re-entrant honeycomb core by Faidallah, Rawabe Fatima, Abd-El Nabi, Ahmed Moustafa, Hanon, Muammel M., Szakál, Zoltán, Oldal, István

“…This study investigates the mechanical behavior of sandwich structures comprising a re-entrant honeycomb core structure created using wood/polylactic acid…”
Get full text

Effect of Hybrid Materials Configuration on The Mechanical Properties of Composites by Ahmad A. Khalaf, Hamid M. Mahan, Aidel Kadum Jassim Al-shamary, Muammel M. Hanon

“…Composite materials have become increasingly popular over the last few years, particularly in the industrial manufacturing sector. This is because such…”
Get full text

Simulation of laser drilling of Inconel X-750 and Ti-5Al-2.5Sn sheets using COMSOL by Hanon, Muammel M., Taha, Ziad A., Zsidai, László

“…The ability of COMSOL Multiphysics 5.2 software to carry out the simulation of laser drilling processes in Inconel X-750 and Ti-5Al-2.5Sn sheets was…”
Get full text

Relative Deviation of Mass Flow Rate in Swirl Injectors due to the Engineering Tolerances: Experimental Study by Hanon, Muammel M., Salman, Nihal D., Alazawi, Dhia A.

“…The accuracy of mass flow rate in injector depends upon the derivation of nozzle diameter ( d c ) and discharge coefficient ( C d ). To compare the…”
Get full text