Search Results - "Giorleo, G."

A comparison between FSW and TIG welding techniques: modifications of microstructure and pitting corrosion resistance in AA 2024-T3 butt joints by Squillace, A., De Fenzo, A., Giorleo, G., Bellucci, F.

“…An experimental investigation has been carried out, in present paper, on microstructure and corrosion resistance of weld butt joints of AA 2024-T3. Two…”
Get full text

On the critical technological issues of friction stir welding lap joints of dissimilar aluminum alloys by Velotti, C., Astarita, A., Squillace, A., Ciliberto, S., Villano, M. G., Giuliani, M., Prisco, U., Montuori, M., Giorleo, G., Bellucci, F.

“…In this article, friction stir welded lap joints of innovative dissimilar aluminum alloys have been produced and tested to investigate the feasibility of using…”
Get full text

Pin and bolt bearing strength of fibreglass/aluminium laminates by Caprino, G., Squillace, A., Giorleo, G., Nele, L., Rossi, L.

“…An experimental investigation was carried out on a fibreglass/aluminium (FGA) laminate in order to characterise its behaviour under pin- and bolt-bearing…”
Get full text

Pin-bearing strength of glass mat reinforced plastics by Caprino, G., Giorleo, G., Nele, L., Squillace, A.

“…An experimental investigation was carried out, in order to find simple analytical methods for the prediction of pin-bearing strength of glass mat reinforced…”
Get full text

Dimensional errors in longitudinal turning based on the unified generalized mechanics of cutting approach.: Part I: Three-dimensional theory by Carrino, L., Giorleo, G., Polini, W., Prisco, U.

“…During the machining of a part, a new surface is generated together with its dimensional deviations. These deviations are due to the presence of several…”
Get full text

Fatigue lifetime of glass fabric/epoxy composites by Caprino, G., Giorleo, G.

“…Monotonic and fatigue tests were carried out in four-point bending on a glass fabric/epoxy composite, using two different stress ratios. Ultimate failure both…”
Get full text

Dimensional errors in longitudinal turning based on the unified generalized mechanics of cutting approach.: Part II: Machining process analysis and dimensional error estimate by Carrino, L., Giorleo, G., Polini, W., Prisco, U.

“…The model presented in the first part of this work is used here to estimate the diameter error in the most common turning operations. In fact, the diameter…”
Get full text

Influence of the flexibiliser content on the monotonic and fatigue behaviour of a polyester resin for composites by Prisco, U., Caprino, G., Giorleo, G.

“…Monotonic tensile tests were carried out on a polyester orthophthalic resin with various contents of flexibiliser, using two loading speeds. All the main…”
Get full text

A Contribution to the Study of Tolerancing Technology by Donnarumma, A., Giorleo, G.

“…Tolerancing technology is a basic tool for the study of interchangeable assemblies and for various kinds of mechanical function.The problem of the congruence…”
Get full text

Location and geometry of defects in composite laminates from infrared images by GIORLEO, G, MEOLA, C

“…An infrared scanning system is employed to analyze defective glass-epoxy laminates. Several specimens, manufactured with insertion of pieces of different…”
Get full text

Analysis of Defective Carbon-Epoxy by Means of Lock-in Thermography by Giorleo, G., Meola, C., Squillace, A.

Get full text

Merging Neural Network Material Rheological Behaviour Modelling with FEM Simulation of Orthogonal Metal Cutting by Giorleo, G., Teti, R., Prisco, U., D'Addona, D.

“…The fully integrated use of a neural network (NN) paradigm for material rheological behaviour modelling and a FEM code for the simulation of orthogonal metal…”
Get full text

Infrared thermography in the quality assurance of manufacturing systems by Meola, C., Giorleo, G., Nele, L., Squillace, A., Carlomagno, G.M.

“…The present work will focus its attention on the aid provided by infrared thermography (IR) in the evolution of manufacturing towards the achievement of…”
Get full text

Analysis of defective carbon-epoxy by means of lock-in thermography by GIORLEO, G, MEOLA, C, SQUILLACE, A

“…The attention of the present work is focused on the analysis of defects in carbon-epoxy laminates. Different specimens are manufactured by varying the laminate…”
Get full text

Fuzzy logic modeling and control of steel rod quenching after hot rolling by GIORLEO, G, MEMOLA CAPECE MINUTOLO, F, SERGI, V

“…Reinforced concrete rod produced by European Community countries must comply with standards that establish minimum strength and tensile properties along with…”
Get full text

Comparison between pulsed and modulated thermography in glass–epoxy laminates by Giorleo, Giuseppe, Meola, Carosena

“…Infrared (IR) thermography is a two-dimensional, non-contact technique which can be usefully employed in non-destructive evaluation of materials. Basically,…”
Get full text

Friction stir welding of AA2198-T3 butt joints for aeronautical applications by Bitondo, C., Prisco, U., Squillace, A., Giorleo, G., Buonadonna, P., Dionoro, G., Campanile, G.

“…This work investigates the influence of the Friction Stir Welding (FSW) parameters on the mechanical properties AA 2198 T3 welds. For this purpose, a…”
Get full text

The use of infrared thermography for nondestructive evaluation of joints by Meola, Carosena, Carlomagno, Giovanni M., Squillace, Antonino, Giorleo, Giuseppe

“…A junction between two similar, or dissimilar, materials represents generally a weak structural point and so it requires accurate choice of the most adequate…”
Get full text

Experimental Characterization of an Innovative Glare® Fiber Reinforced Metal Laminate in Pin Bearing by Meola, Carosena, Squillace, Antonino, Giorleo, Giuseppe, Nele, Luigi

“…An experimental investigation is performed on an innovative Glare® Fiber Reinforced Metal Laminate (FRML), which is produced at the Alenia Aerospazio (Italy),…”
Get full text

Dimensional errors in longitudinal turning based on the unified generalized mechanics of cutting approach by Carrino, L., Giorleo, G., Polini, W., Prisco, U.

Get full text