Search Results - "Fox‐Rabinovich, G. S."

Effect of mechanical properties measured at room and elevated temperatures on the wear resistance of cutting tools with TiAlN and AlCrN coatings by Fox-Rabinovich, G.S., Beake, B.D., Endrino, J.L., Veldhuis, S.C., Parkinson, R., Shuster, L.S., Migranov, M.S.

“…A comprehensive study of the mechanical properties of TiAlN and AlCrN coated cutting tools has been performed at room and elevated temperatures (up to 500 °C)…”
Get full text

Hard AlTiN, AlCrN PVD coatings for machining of austenitic stainless steel by Endrino, J.L., Fox-Rabinovich, G.S., Gey, C.

“…The austenitic stainless steels in general are considered to be difficult to machine materials. This is mainly due to the high plasticity and tendency to…”
Get full text

Thin-Film PVD Coating Metamaterials Exhibiting Similarities to Natural Processes under Extreme Tribological Conditions by Fox-Rabinovich, G S, Gershman, I S, Veldhuis, S

“…This paper discusses the surface-engineered nanomaterials (adaptive nano-structured physical vapor deposition (PVD) thin-film coatings) that can effectively…”
Get full text

Coating optimisation for high speed machining with advanced nanomechanical test methods by Beake, B.D., Fox-Rabinovich, G.S., Veldhuis, S.C., Goodes, S.R.

“…Advanced nanomechanical testing has been used to evaluate key factors influencing tool life (1) a plasticity index (PI, the plastic work done/total work done…”
Get full text

Surface/interface phenomena in nano‐multilayer coating under severing tribological conditions by Fox‐Rabinovich, G. S., Gershman, I. S., Yamamoto, K., Aguirre, M. H., Covelli, D., Arif, T., Aramesh, M., Shalaby, M. A., Veldhuis, S.

“…An extensive study of surface/interface phenomena during wear of an adaptive TiAlCrSiYN/TiAlCrN nano‐multilayer coating deposited using physical vapor…”
Get full text

Oxidation tuning in AlCrN coatings by Endrino, J.L., Fox-Rabinovich, G.S., Reiter, A., Veldhuis, S.V., Escobar Galindo, R., Albella, J.M., Marco, J.F.

“…In this work, we have studied the influence of the coating design and composition on the oxidation behavior of Al x Cr 1− x N ( x = 0.70) coatings. In…”
Get full text

Oxidation post-treatment of hard AlTiN coating for machining of hardened steels by Endrino, J.L., Fox-Rabinovich, G.S., Escobar Galindo, R., Kalss, W., Veldhuis, S., Soriano, L., Andersson, J., Gutiérrez, A.

“…In this study, cemented carbide ball nose end mills with nano-crystalline Al 0.67Ti 0.33N hard PVD coatings deposited by cathodic arc evaporation were annealed…”
Get full text

Progress in high temperature nanomechanical testing of coatings for optimising their performance in high speed machining by Beake, B.D., Fox-Rabinovich, G.S.

“…Frictional heating results in very high operating temperatures in high speed machining but the nanoindentation tests used to evaluate novel PVD coating systems…”
Get full text

Elastic and plastic work of indentation as a characteristic of wear behavior for cutting tools with nitride PVD coatings by Fox-Rabinovich, G.S., Veldhuis, S.C., Scvortsov, V.N., Shuster, L. Sh, Dosbaeva, G.K., Migranov, M.S.

“…The chemical and phase composition as well as the structural characteristics of TiN-based PVD versus the nitrogen pressure used during deposition coatings were…”
Get full text

Wear performance of different PVD coatings during hard wet end milling of H13 tool steel by Beake, B.D., Ning, Li, Gey, Ch, Veldhuis, S.C., Kornberg, A.B., Weaver, A., Khanna, M., Fox-Rabinovich, G.S.

“…Wear performance of end mill tools with different PVD coatings has been studied under the condition of hard wet machining of H13 tool steel. It was shown that…”
Get full text

Oxidation resistant Ti-Al-Cr alloy for protective coating applications by Fox-Rabinovich, G.S., Wilkinson, D.S., Veldhuis, S.C., Dosbaeva, G.K., Weatherly, G.C.

“…Ternary Ti-Al-Cr alloys offer excellent oxidation stability at elevated temperatures due to the formation of a continuous alumina surface layer during…”
Get full text

Wear performance investigation of PVD coated and uncoated carbide tools during high-speed machining of TiAl6V4 aerospace alloy by Chowdhury, M.S.I., Bose, B., Yamamoto, K., Shuster, L.S., Paiva, J., Fox-Rabinovich, G.S., Veldhuis, S.C.

“…Selection of hard PVD coatings for the machining of Ti6Al4V alloy should be based on the dominant tool wear mechanism and tribological phenomena occurring at…”
Get full text

Design and performance of AlTiN and TiAlCrN PVD coatings for machining of hard to cut materials by Fox-Rabinovich, G.S., Kovalev, A.I., Aguirre, M.H., Beake, B.D., Yamamoto, K., Veldhuis, S.C., Endrino, J.L., Wainstein, D.L., Rashkovskiy, A.Y.

“…Machining of hard to cut materials such as hardened steels and high temperature strong aerospace materials is a challenge of modern manufacturing. Two…”
Get full text

Impact of ion modification of HSS surfaces on the wear resistance of cutting tools with surface engineered coatings by Fox-Rabinovich, G.S, Bushe, N.A, Kovalev, A.I, Korshunov, S.N, Shuster, L.Sh, Dosbaeva, G.K

“…The paper considers some ways to improve surface engineered coatings for cutting tools. These coatings were formed by two stages: diffusion saturation with…”
Get full text

Influence of Cutting Conditions on the Wear Resistance of Tools with a TiB2 Coating during Titanium Alloy Machining by Shuster, L. Sh, Fox-Rabinovich, G. S., Chertovskikh, S. V.

“…— The effect of cutting conditions on the tribotechnical characteristics and wear resistance of cutting tools with and without TiB 2 coating during processing…”
Get full text

Wear behaviour of coated carbide tools during machining of Ti6Al4V aerospace alloy associated with strong built up edge formation by Chowdhury, M.S.I., Chowdhury, S., Yamamoto, K., Beake, B.D., Bose, B., Elfizy, A., Cavelli, D., Dosbaeva, G., Aramesh, M., Fox-Rabinovich, G.S., Veldhuis, S.C.

“…In the machining of Ti alloys, it is challenging to optimise the cutting tool life and process productivity. It is not a trivial task to find an efficient…”
Get full text

Study of TiB2 Coated Hard Alloy Tool Wear Resistance During Titanium Alloy Machining by Сhertovskikh, S. V., Shuster, L. Sh, Fox-Rabinovich, G. S.

“…Results are presented for a study of the wear resistance and tribological properties (friction coefficient adhesive component, bond adhesive shear strength,…”
Get full text

Elevated temperature repetitive micro-scratch testing of AlCrN, TiAlN and AlTiN PVD coatings by Beake, B.D., Endrino, J.L., Kimpton, C., Fox-Rabinovich, G.S., Veldhuis, S.C.

“…In developing advanced wear-resistant coatings for tribologically extreme highly loaded applications such as high speed metal cutting a critical requirement is…”
Get full text

Influence of probe geometry in micro-scale impact testing of nano-multilayered TiAlCrN/NbN coatings deposited on WC-Co by Beake, B.D., Bergdoll, L., Isern, L., Endrino, J.L., Fox-Rabinovich, G.S., Veldhuis, S.C.

“…Hard nano-multilayered TiAlCrN/NbN coatings on cemented carbide have shown promise in dry high speed machining applications involving repetitive contact, such…”
Get full text

Features of electronic and lattice mechanisms of transboundary heat transfer in multilayer nanolaminate TiAlN/Ag coatings by Kovalev, A. I., Wainstein, D. L., Vakhrushev, V. O., Gago, R., Soldera, F., Endrino, J. L., Fox-Rabinovich, G. S., Veldhuis, S.

“…Plasmon resonance heterogeneities were identified and studied along Ag and TiAlN layers within a multilayer stack in nanolaminate TiAlN/Ag coatings. For this…”
Get full text