Search Results - "Dercz, G."

Effect of Milling Time on Crystallization Sequence and Microstructure of NiTi Alloys Produced Via High-Energy Ball Milling by Goryczka, T., Dercz, G.

“…A 20 gram batch weight of NiTi alloy, with a nominal equiatomic composition, was produced by mechanical alloying with milling times of 100, 120, and 140 hours…”
Get full text

Study on crystallization phenomenon and thermal stability of binary Ni–Nb amorphous alloy by Lesz, S., Dercz, G.

“…In this paper, a ribbon of binary Ni–Nb amorphous alloy was prepared by the melt spinning technique. Glass transition and crystallization phenomenon of the…”
Get full text

The effect of deep cryogenic treatment and precipitation hardening on the structure, micromechanical properties and wear of the Mg–Y-Nd-Zr alloy by Barylski, A., Aniołek, K., Dercz, G., Kupka, M., Kaptacz, S.

“…The paper presents the effect of deep cryogenic treatment (DCT) and a synergic combination of low-temperature treatment and precipitation hardening on the…”
Get full text

Mechanical and tribological properties of oxide layers obtained on titanium in the thermal oxidation process by Aniołek, K., Kupka, M., Barylski, A., Dercz, G.

“…•The paper presents characterisation of an oxide layer obtained on titanium.•A phase analysis showed that TiO2 (rutile) and Ti3O are the prevalent types of…”
Get full text

Improvement of corrosion resistance of Zn-Ni alloy coatings by anodizing in selected alcoholic solutions by Maciej, A., Wadas, A., Sowa, M., Socha, R., Dercz, G., Rabe, M., Simka, W.

“…•Anodic treatment has been used to modify the Zn-Ni alloy coatings on steel.•Alcoholic solutions were used for the first time for anodizing of Zn-Ni…”
Get full text

The properties of (1-x)(0.5PZT-0.5PFW)-xPFN ceramics doped by Li by Brzezińska, D., Skulski, R., Niemiec, P., Dercz, G.

“…The results of obtaining and investigating multiferroic solid solution PZT-PFW-PFN doped by Li (i.e. PZT-PFW-PFN:Li) are presented in this paper. The ceramic…”
Get full text

Effect of milling time and presence of Sn on the microstructure and porosity of sintered Ti-10Ta-8Mo and Ti-10Ta-8Mo-3Sn alloys by Dercz, G., Matuła, I., Maszybrocka, J., Zubko, M., Barczyk, J., Pająk, L., Stach, S.

“…The aim of the present study was to assess the influence of the milling time (10 h, 15 h and 20 h) on the structure and properties of Ti-10Ta-8Mo (wt.%) and…”
Get full text

Properties of Porous Ti–26Nb–6Mo–1.5Sn Alloy Produced via Powder Metallurgy for Biomedical Applications by Dercz, G., Matuła, I., Maszybrocka, J.

“…The aim of the present study was to assess the possibility of producing porous Ti–26Nb–6Mo–1.5Sn (at %) alloy using combined mechanical alloying and sintering…”
Get full text

High-density lead-free K0.5Bi0.5TiO3 ceramics: preparation, mechanical and dielectric properties by Czaja, P., Suchanicz, J., Bochenek, D., Dercz, G., Piasecki, M., Hudy, W.

“…The preparation of high-density lead-free potassium-bismuth titanate K 0.5 Bi 0.5 TiO 3 about 96-98% of the calculated density (X-ray), confirmed by the…”
Get full text

Microstructure Evolution of TI/ZRO2 and TI/AL2O3 Composites Prepared by Powder Metallurgy Method by Dercz, G, Matuła, I, Gurdziel, W, Kuczera, N

“…The current study were performed in order to assess the fabrication possibility of the metal-ceramic composites based on nanocrystalline substrates. The…”
Get full text

Structural analysis and corrosion studies on an ISO 5832-9 biomedical alloy with TiO2 sol–gel layers by Burnat, B., Dercz, G., Blaszczyk, T.

“…The aim of this study was to demonstrate the relationship between the structural and corrosion properties of an ISO 5832-9 biomedical alloy modified with…”
Get full text

Effect of Nb and Zr alloying additives on structure and properties of Ti-Ta-Nb-Zr alloys for medical applications by Dercz, G., Matuła, I., Prusik, K., Zając, J., Szklarska, M., Kazek-Kęsik, A., Simka, W.

“…This work investigated two titanium-based alloys with a constant tantalum content and variable contents of alloy additives – niobium and zirconium. The…”
Get full text

Two-step method for preparation of Al2O3/IF-WS2 nanoparticles composite coating by Korzekwa, J., Tenne, R., Skoneczny, W., Dercz, G.

“…Al2O3/IF‐WS2 nanocomposite coating was prepared in a two‐step process. The Al2O3 nano‐fibers are the matrix of the composite and the nanoparticles of WS2 with…”
Get full text

Synthesis of Ti-Nb-Zr Alloys Combined Powder Metallurgy and Arc Melting Methods by I. Matuła, G. Dercz, K. Prusik, M. Szklarska, A. Kazek-Kęsik, W. Simka, E. Sudoł

“…Scientists and medics are still searching for new metallic materials that can be used in medicine, e.g., as material for implants. The following article…”
Get full text

Technology and Dielectric Properties of the KNLN Doped with Nd3+ and Pr3+ Ions by Bochenek, D, Osińska, K, Mankiewicz, M, Niemiec, P, Dercz, G

“…The paper presents the technology and basic properties of three compositions of lead-free ceramics: (i) (K0.44Na0.52Li0.04)NbO3, (ii)…”
Get full text

Characterization of Long-Term Corrosion Performance of TI15MO Alloy in Saline Solution by Szklarska, M, Łosiewicz, B, Dercz, G, Zubko, M, Albrecht, R, Stróż, D

“…The Ti15Mo alloy has been studied towards long-term corrosion performance in saline solution at 37°C using electrochemical impedance spectroscopy. The physical…”
Get full text

Phase Composition of Urban Soils by X-Ray Diffraction and Mössbauer Spectroscopy Analysis by Kierlik, P, Hanc-Kuczkowska, A, Męczyński, R, Matuła, I, Dercz, G

“…The main purpose of this study was to identify the mineral composition of soil sample taken from the upper layer of topsoil. High absorption of chemical…”
Get full text

Microstructure Analysis of Equiatomic Multi-Component NI20TI20TA20CO20CU20 Alloy by Glowka, K, Zubko, M, Świec, P, Prusik, K, Dercz, G, Stróż, D

“…An equiatomic multi-component alloy Ni20Ti20Ta20Co20Cu20 (at. %) was obtained using vacuum arc melting. In order to characterize such an alloy, microstructure…”
Get full text

Microstructure of Multi-Component NI35TI35TA10CO10CU10 Alloy by Glowka, K, Zubko, M, Świec, P, Prusik, K, Dercz, G, Matyja, E, Stróż, D

“…A new NiTi-based multi-component Ni35Ti35Ta10Co10Cu10 (at.%) alloy was obtained by vacuum arc melting. The microstructure of the alloy has been studied using…”
Get full text

Microstructure and Properties of YSZ Coatings Prepared by Plasma Spray Physical Vapor Deposition for Biomedical Application by Barczyk, J., Dercz, G., Matuła, I., Góral, M., Maszybrocka, J., Bochenek, D., Gurdziel, W.

“…This paper presents the study of microstructure and properties of 8 mol% yttrium stabilized zirconia coating fabricated by Plasma Spray Physical Vapor…”
Get full text