Search Results - "Barsoum, Imad"

Tension–torsion fracture experiments—Part I: Experiments and a procedure to evaluate the equivalent plastic strain by Faleskog, Jonas, Barsoum, Imad

“…Ductile failure experiments on a double notched tube (DNT) specimen subjected to a combination of tensile load and torque that was applied at a fixed ratio is…”
Get full text

Micromechanical analysis on the influence of the Lode parameter on void growth and coalescence by Barsoum, Imad, Faleskog, Jonas

“…A micromechanical model consisting of a band with a square array of equally sized cells, with a spherical void located in each cell, is developed. The band is…”
Get full text

Rupture mechanisms in combined tension and shear—Experiments by Barsoum, Imad, Faleskog, Jonas

“…An experimental investigation of the rupture mechanisms in a mid-strength and a high-strength steel were conducted employing a novel test configuration. The…”
Get full text

Computational biomechanical analysis of Ti-6Al-4V porous bone plates for lower limb fractures by Mehboob, Ali, Mehboob, Hassan, Ouldyerou, Abdelhak, Barsoum, Imad

“…[Display omitted] •Porous bone plates with cubic (C), diamond (BCC) and body-centered cubic (CBCC) structures were prepared.•Axial compression, torsional and…”
Get full text

Enhancing compressive performance in 3D printed pyramidal lattice structures with geometrically tailored I-shaped struts by Uddin, Mohammed Ayaz, Barsoum, Imad, Kumar, S., Schiffer, Andreas

“…This study examines the compressive response of geometrically tailored pyramidal lattice structures composed of struts with I-shaped cross-sections…”
Get full text

Constitutive model calibration for the thermal viscoelastic-viscoplastic behavior of high density polyethylene under monotonic and cyclic loading by Almomani, Abdulla, Deveci, Suleyman, Mourad, Abdel-Hamid I., Barsoum, Imad

“…High density polyethylene (HDPE) can show viscoelastic-viscoplastic behaviors under monotonic loads and a stress softening after reloading under cyclic ones…”
Get full text

Influence of thermo-mechanical material properties of different steel grades on welding residual stresses and angular distortion by Bhatti, Ayjwat A., Barsoum, Zuheir, Murakawa, Hidekazu, Barsoum, Imad

“…•Thermal conductivity and density can be taken as constants in thermal analysis.•It is sufficient to employ temperature dependent heat capacity in thermal…”
Get full text

Design of novel isosurface strut-based lattice structures: Effective stiffness, strength, anisotropy and fatigue properties by Viswanath, Asha, Khan, Kamran A., Barsoum, Imad

“…[Display omitted] •A methodology is proposed to design novel isosurface strut lattice structure (ISLS) derived from TPMS.•Structural element of ISLS were…”
Get full text

Measurement of local galvanic surface corrosion using scanning electrochemical microscopy on ductile cast iron by Nickchi, Tirdad, Rostron, Paul, Barsoum, Imad, Alfantazi, Akram

“…The application of scanning electrochemical microscopy has increased recently in corrosion studies. The electrochemical activity image is usually generated…”
Get full text

Modelling, optimization, and testing of novel cuboidal spherical plate lattice structures by Almesmari, Abdulla, Barsoum, Imad, Abu Al-Rub, Rashid K.

“…ABSTRACTThis study investigates the mechanical behavior of a novel set of Cuboidal Spherical Plate Lattice (CSPL) materials. The procedure of…”
Get full text

Topology optimised novel lattice structures for enhanced energy absorption and impact resistance by Almesmari, Abdulla, Barsoum, Imad, Abu Al-Rub, Rashid K.

“…This study evaluates topologically optimized lattice structures for high strain rate loading, crucial for impact resistance. Using the BESO (Bidirectional…”
Get full text

Truncated Newton Kernel Ridge Regression for Prediction of Porosity in Additive Manufactured SS316L by Abdulla, Hind, Maalouf, Maher, Barsoum, Imad, An, Heungjo

“…Despite the many benefits of additive manufacturing, the final quality of the fabricated parts remains a barrier to the wide adoption of this technique in…”
Get full text

Comparison of microstructural, texture and mechanical properties of SiC and Zn particle reinforced FSW 6061-T6 aluminium alloy by Kesharwani, Rahul, Jha, Kishor Kumar, Imam, Murshid, Sarkar, Chiranjit, Barsoum, Imad

“…This work investigates the microstructure, mechanical characteristics, and texture evolution of friction stir welding (FSW) of AA6061-T6 metal matrix…”
Get full text

An experimental study of heat transfer enhancement with winglets inside a tube by Liang, G., Islam, Md, Alam, Md. Mahbub, Barsoum, Imad

“…The thermal enhancement and pressure drop in a circular tube with radially-arrayed winglet vortex generator (VG) mounted inside at different orientations were…”
Get full text

Degradation of Concrete Structures in Nuclear Power Plants: A Review of the Major Causes and Possible Preventive Measures by Rasheed, Pathath Abdul, Nayar, Sunitha K., Barsoum, Imad, Alfantazi, Akram

“…Concrete, an integral part of a nuclear power plant (NPP), experiences degradation during their operational lifetime of the plant. In this review, the major…”
Get full text

Review of Additively Manufactured Polymeric Metamaterials: Design, Fabrication, Testing and Modeling by Almesmari, Abdulla, Baghous, Nareg, Ejeh, Chukwugozie J, Barsoum, Imad, Abu Al-Rub, Rashid K

“…Metamaterials are architected cellular materials, also known as lattice materials, that are inspired by nature or human engineering intuition, and provide…”
Get full text

Geometric and Material Modelling Aspects for Strength Prediction of Riveted Joints by Lundkvist, Axel, Barsoum, Imad, Barsoum, Zuheir, Khurshid, Mansoor

“…The aim of this study is to develop a methodology for static strength and failure mode simulation of hot-driven riveted joints. The purpose is to be able to…”
Get full text

Numerical investigation of the mechano-electro-chemical effect of X100 buried pipelines with pre-existing corrosion defects by Mubarak, Ghadeer, Gadala, Ibrahim, Barsoum, Imad, AlFantazi, Akram

“…This study investigates the corrosion kinetics and crack propagation in buried transmission pipelines made of high-strength low alloy steel API X100. Despite…”
Get full text

Unveiling the latest progresses in chromium-coated Zircaloy cladding ATF materials: Fabrication techniques, performance metrics, and beyond by Mohamed, Ghadeer Hegab, Karuppasamy, K., Alrwashdeh, Mohammad, Barsoum, Imad, Alameri, Saeed, Alfantazi, Akram

“…After the Fukushima-Daiichi event, there has been notable progress in developing accident-tolerant fuel (ATF) cladding designs to improve light-water reactor…”
Get full text

Numerical Investigation on the Effect of Residual Stresses on the Effective Mechanical Properties of 3D-Printed TPMS Lattices by Ahmed, Nissar, Barsoum, Imad, Abu Al-Rub, Rashid K.

“…The layer-by-layer process of additive manufacturing (AM) is known to give rise to high thermal gradients in the built body resulting in the accumulation of…”
Get full text