Search Results - "Atapour, Masoud"

Nanometric CrN/CrAlN and CrN/ZrN multilayer physical vapor deposited coatings on 316L stainless steel as bipolar plate for proton exchange membrane fuel cells by Rajabi, Tohid, Atapour, Masoud, Elmkhah, Hasan, Nahvi, Saied Mehran

“…•Cathodic arc evaporation of multilayer thin films for bipolar plate applications.•Nanometric CrN/CrAlN and CrN/ZrN multilayers coated on 316L stainless…”
Get full text

Enhanced photoelectrochemical cathodic protection of stainless steel under visible light using Co3O4–ZnO-modified TiO2 nanotubes by Ebrahimi, Mina, Atapour, Masoud, Bahrami, Abbas, Momeni, Mohamad Mohsen

“…Developing solar energy conversion strategies is crucial to overcome stainless steel corrosion protection challenges. Through the chemical bath deposition…”
Get full text

Corrosion and metal release investigations of selective laser melted 316L stainless steel in a synthetic physiological fluid containing proteins and in diluted hydrochloric acid by Atapour, Masoud, Wang, Xuying, Färnlund, Kim, Odnevall Wallinder, Inger, Hedberg, Yolanda

“…•The building direction influences the microstructure and surface oxide composition.•Increased chromium release due to protein-Cr complexation in solution at…”
Get full text

A self-healing and bioactive coating based on duplex plasma electrolytic oxidation/polydopamine on AZ91 alloy for bone implants by Farshid, Safoora, Kharaziha, Mahshid, Atapour, Masoud

“…Magnesium (Mg) alloys are well-known in biomedical materials owing to their elastic module near to bone, biocompatibility and biodegradation properties…”
Get full text

Effects of cooling regimes on the microstructural and mechanical properties of the transient liquid phase joints of UNS S32750 super duplex stainless steel/BNi-2/AISI 304 stainless steel by Abdolvand, Rouhollah, Atapour, Masoud, Shamanian, Morteza

“…UNS S32750 super duplex stainless steel and AISI 304 stainless steel were transient liquid phase (TLP) bonded using BNi-2 at a bonding temperature of 1050 °C…”
Get full text

Corrosion Characteristics of TiNbMoMnFe High Entropy Thin Film Deposited on AISI316L for Biomedical Applications by Razazzadeh, Alireza, Atapour, Masoud, Enayati, Mohammad Hossein

“…High entropy alloys (HEAs) have received tremendous attention in different applications because of their excellent corrosion resistance and superior mechanical…”
Get full text

Fabrication and photoelectrochemical activity of Mn/Cr co-doped titanium oxide nanostructures and their application in photocathodic protection of stainless steel by Motalebian, Majid, Momeni, Mohamad Mohsen, Ghayeb, Yousef, Atapour, Masoud

“…Various Mn-Cr co-doped titanium dioxide nanotubes (Mn/Cr-TNs) have been prepared on titanium plates through electrochemical anodization. The crystal structure,…”
Get full text

Investigation on the Potential of Laser and Electron Beam Additively Manufactured Ti–6Al–4V Components for Orthopedic Applications by Bandekhoda, Mohamad Reza, Mosallanejad, Mohammad Hossein, Atapour, Masoud, Iuliano, Luca, Saboori, Abdollah

“…In the present study, corrosion properties and biocompatibility of as-built and as-polished Ti–6Al–4V samples fabricated by Electron Beam Melting (EBM) and…”
Get full text

Friction stir spot welding of TiO2 nanoparticle-reinforced interstitial free steel by Sadeghi, Behzad, Abbasi, Hamid, Atapour, Masoud, Shafiee, Saeed, Cavaliere, Pasquale, Marfavi, Zeinab

“…The purpose of the current study was to investigate the effect of different content of TiO 2 nanoparticles and FSSW parameter such as tool rotational speed on…”
Get full text

Towards an antibacterial self‐healing coating based on linseed oil/ZnO nanoparticles repair agent, encapsulated in polyurea formaldehyde microcapsules by Karampoor, Mohammad Reza, Bahrami, Abbas, Atapour, Masoud

“…This research aims at investigating the idea of anti‐bacterial self‐healing coatings based on polyurea formaldehyde microcapsules (MCs), with the repair agent…”
Get full text

Preparation of chromium and sulfur single and co-doped TiO2 nanostructures for efficient photoelectrochemical water splitting: effect of aliphatic alcohols on their activity by Momeni, Mohamad Mohsen, Akbarnia, Mehrdad, Atapour, Masoud, Khalaghi, Mona

“…Single and co-doped chromium and sulfur TiO 2 nanotubes appropriate for photoelectrochemical water splitting application have been prepared and characterized…”
Get full text

Photocatalytic activity and photo-electrochemical performance of trimetallic (Cu–Ni–Zn)/TiO2 coating on AISI 316L stainless steel for water treatment by Khalaghi, Mona, Atapour, Masoud, Momeni, Mohamad Mohsen, Zaeri, Mohammad Reza, Ghaffari, Ghasem

“…Trimetallic (Cu–Ni–Zn)-doped TiO 2 photocatalyst was synthesized by the sol–gel method and deposited on AISI 316L stainless steel for industrial wastewater…”
Get full text

Influence of Cold Rolling on the Microstructure and Mechanical Properties of FeCoCrNiMn High-Entropy Alloy by Sarmadi, Mohamad Ahl, Atapour, Masoud, Alizadeh, Mehdi

“…This study delved into the influence of room temperature rolling on an FeCoCrNiMn high-entropy alloy. Initially, the alloy was synthesized via vacuum induction…”
Get full text

Corrosion and metal release characterization of stainless steel 316L weld zones in whey protein solution by Varmaziar, Sadegh, Atapour, Masoud, Hedberg, Yolanda S.

“…Stainless steel ASTM 316 L is often used in the food industry as contact material with protein-rich dairy products. It has to be welded at some locations for…”
Get full text

Effect of electrochemical parameters on wear and tribocorrosion capabilities of the PEO coatings generated through pulsed waveforms on AZ91 magnesium alloy by Heydarian, Ali, Rahmati, Maryam, Atapour, Masoud, Hakimizad, Amin, Raeissi, Keyvan

“…In this study, PEO coatings were produced on AZ91 Mg alloy using pulsed waveforms at different electrical parameters such as type (unipolar and bipolar),…”
Get full text

Mechanical, electrochemical and permeability behaviour of Ti6Al–4V scaffolds fabricated by electron beam powder bed fusion for orthopedic implant applications: The role of cell type and cell size by Sichani, Hesam Rezvani, Atapour, Masoud, Ashrafizadeh, Fakhreddin, Galati, Manuela, Saboori, Abdollah

“…Ti–6Al–4V scaffolds have attracted much attention for biomedical applications owing to their bone-mimicking mechanical properties and better bone tissue…”
Get full text

Hybrid additive manufacturing of an electron beam powder bed fused Ti6Al4V by transient liquid phase bonding by Ghorbani, Hamid Reza, Mosallanejad, Mohammad Hossein, Atapour, Masoud, Galati, Manuela, Saboori, Abdollah

“…Hybrid Additive Manufacturing (HAM) is a production strategy enhancing the flexibility of the already versatile Additive Manufacturing (AM) techniques. AM of…”
Get full text

Assessment of Microstructure and Stress Corrosion Cracking Susceptibility of Multipass Gas Metal Arc Welded Al 5083-H321 Aluminum Alloy by Bodaghi, Fatemeh, Atapour, Masoud, Shamanian, Morteza

“…The effect of single pass and multipass (double and triple pass) gas metal arc welding (GMAW) on the microstructure and stress corrosion cracking…”
Get full text

Microstructure and Corrosion Properties of Friction Stir-Welded High-Strength Low -Alloy Steel by Behjat, Amir, Shamanian, Morteza, Atapour, Masoud, Sarmadi, Mohammad Ahl

“…The microstructure and corrosion behavior of friction stir (FS) welded API X-60 pipeline steel were investigated. Three FS welds were successfully fabricated…”
Get full text

Effects of Transient Liquid Phase Bonding Time on Microstructure, Mechanical and Corrosion Properties During Bonding of Inconel 617/AISI 310 Stainless Steel by Salehi Mobarakeh, Vahid, Niroumand, Behzad, Atapour, Masoud, Shamanian, Morteza

“…In this study, effects of bonding time on microstructure, mechanical properties and corrosion resistance of transient liquid phase bonded Inconel 617 and AISI…”
Get full text