Search Results - "ANTONCZAK, Arkadiusz J"

Structural, thermal and mechanical changes in poly(l-lactide)/hydroxyapatite composite extruded foils modified by CO2 laser irradiation by Kryszak, Bartłomiej, Szustakiewicz, Konrad, Stępak, Bogusz, Gazińska, Małgorzata, Antończak, Arkadiusz J.

“…[Display omitted] •PLLA/hydroxyapatite foil was obtained using extrusion and film casting processes.•The composite was modified using CO2 laser infrared…”
Get full text

The influence of process parameters on the laser-induced coloring of titanium by Antończak, Arkadiusz J., Stępak, Bogusz, Kozioł, Paweł E., Abramski, Krzysztof M.

“…This paper presents the results of the measurements and analysis of the influence of laser process parameters on the color obtained. The study was conducted…”
Get full text

Laser-induced colour marking—Sensitivity scaling for a stainless steel by Antończak, Arkadiusz J., Kocoń, Dariusz, Nowak, Maciej, Kozioł, Paweł, Abramski, Krzysztof M.

“…► Effect of parameters of laser colour marking on the colour obtained were analyzed. ► The investigations were performed for AISI 304 stainless steel using a…”
Get full text

Cytotoxicity Study of UV-Laser-Irradiated PLLA Surfaces Subjected to Bio-Ceramisation: A New Way towards Implant Surface Modification by Szustakiewicz, Konrad, Kryszak, Bartłomiej, Dzienny, Paulina, Poźniak, Błażej, Tikhomirov, Marta, Hoppe, Viktoria, Szymczyk-Ziółkowska, Patrycja, Tylus, Włodzimierz, Grzymajło, Michał, Gadomska-Gajadhur, Agnieszka, Antończak, Arkadiusz J

“…In this research we subjected samples of poly(L-lactide) (PLLA) extruded film to ultraviolet (193 nm ArF excimer laser) radiation below the ablation threshold…”
Get full text

Laser-induced oxidation of titanium substrate: Analysis of the physicochemical structure of the surface and sub-surface layers by Antończak, Arkadiusz J., Skowroński, Łukasz, Trzcinski, Marek, Kinzhybalo, Vasyl V., Łazarek, Łukasz K., Abramski, Krzysztof M.

“…•Chemical structure of the films induced by laser on titanium surface was analyzed.•It was shown that outer layer of this films consist of oxides doped with…”
Get full text

Mechanical properties and degradation of laser sintered structures of PLA microspheres obtained by dual beam laser sintering method by Kryszak, Bartłomiej, Gazińska, Małgorzata, Gruber, Piotr, Wieczorek, Mateusz, Krokos, Anna, Dzienny, Paulina, Szymczyk-Ziółkowska, Patrycja, Olejarczyk, Michał, Antończak, Arkadiusz J.

“…This paper discusses the influence of process parameters on the degradation and the mechanical properties of laser-sintered polylactide (PLA) microspheres…”
Get full text

Degradation of poly(L-lactide) under KrF excimer laser treatment by STEPAK, Bogusz D, ANTONCZAK, Arkadiusz J, SZUSTAKIEWICZ, Konrad, KOZIOL, Pawel E, ABRAMSKI, Krzysztof M

“…In this paper, the authors present an impact of the KrF excimer laser irradiation above the ablation threshold on physicochemical properties of biodegradable…”
Get full text

Degradation of poly(l-lactide) under CO2 laser treatment above the ablation threshold by Antończak, Arkadiusz J., Stępak, Bogusz D., Szustakiewicz, Konrad, Wójcik, Michał R., Abramski, Krzysztof M.

“…In this paper, we present an analysis of changes in material properties in the heat affected zone HAZ induced by the CO2 laser at the fluence well above the…”
Get full text

Conductive aluminum line formation on aluminum nitride surface by infrared nanosecond laser by Kozioł, Paweł E., Antończak, Arkadiusz J., Szymczyk, Patrycja, Stępak, Bogusz, Abramski, Krzysztof M.

“…•The studies on the fabrication of conductive aluminum paths on AlN ceramic surface by the interaction of laser radiation Nd:YAG were conducted.•The course of…”
Get full text

The influence of organobentonite clay on CO2 laser grooving of nylon 6 composites by Antończak, Arkadiusz J., Nowak, Maciej, Szustakiewicz, Konrad, Pigłowski, Jacek, Abramski, Krzysztof M.

“…The popular polycaprolactam (polyamide PA6), commonly referred to as nylon 6, widely used as a construction plastic, is not a typical material for…”
Get full text

Direct laser writing of Fresnel microlenses with use of the scanning contour ablation method by Wójcik, Michał R., Antończak, Arkadiusz J., Stępak, Bogusz D., Kozioł, Paweł E., Łazarek, Łukasz K., Abramski, Krzysztof M.

“…Modern technological trends require the miniaturization of various devices, and hence the fabrication of micro-scale optical elements. Despite the existence of…”
Get full text

Laser sintering of polyamide 12 with limited thermal degradation by Gruber, Piotr, Kubeczek, Aleksander, Olejarczyk, Michał, Ziółkowski, Grzegorz, Antończak, Arkadiusz J.

“…The paper presents, for the first time, the results of PA12 polyamide sintering using the original method of Dual Beam Laser Sintering of polymers (DBLS). The…”
Get full text

First, do not degrade – Dual Beam Laser Sintering of polymers by Antończak, Arkadiusz J., Wieczorek, Mateusz, Dzienny, Paulina, Kryszak, Bartłomiej, Krokos, Anna, Gruber, Piotr, Olejarczyk, Michał, Gazińska, Małgorzata

“…In this paper, the method of Dual Beam Laser Sintering of polymers (DBLS) is presented for the first time. In this method, rather than heating the entire…”
Get full text

High porosity composite structures produced from poly(lactic acid)/hydroxyapatite microspheres using novel Dual Beam Laser Sintering method: Analysis of structural, mechanical and thermal properties by Gruber, Piotr, Ziółkowski, Grzegorz, Gazińska, Małgorzata, Kryszak, Bartłomiej, Krokos, Anna, Olejarczyk, Michał, Szymczyk-Ziółkowska, Patrycja, Dzienny, Paulina, Antończak, Arkadiusz J.

“…The paper discusses the applicability of the novel Dual Beam Laser Sintering (DBLS) method for processing of poly(lactic acid)/hydroxyapatite (PLA/HAp)…”
Get full text

Unsupervised verification of laser-induced breakdown spectroscopy dataset clustering by Wójcik, Michał R., Zdunek, Rafał, Antończak, Arkadiusz J.

“…Laser-induced breakdown spectroscopy is a versatile, optical technique used in a wide range of qualitative and quantitative analyses conducted with the use of…”
Get full text

Evaluation of the laser-induced breakdown spectroscopy technique for determination of the chemical composition of copper concentrates by Łazarek, Łukasz, Antończak, Arkadiusz J., Wójcik, Michał R., Drzymała, Jan, Abramski, Krzysztof M.

“…Laser-induced breakdown spectroscopy (LIBS), like many other spectroscopic techniques, is a comparative method. Typically, in qualitative analysis, synthetic…”
Get full text

Degradation of poly(l-lactide) under CO sub(2) laser treatment above the ablation threshold by Antonczak, Arkadiusz J, Stepak, Bogusz D, Szustakiewicz, Konrad, Wojcik, Michal R, Abramski, Krzysztof M

“…In this paper, we present an analysis of changes in material properties in the heat affected zone HAZ induced by the CO sub(2) laser at the fluence well above…”
Get full text

Single frequency solid state laser stabilized by FBG by Antonczak, A.J., Sotor, J.Z., Abramski, K.M.

“…The paper deals with the basic set-up of single-frequency microchip laser - so called Lyot filter configuration. Some results obtained for neodymium microchip…”
Get full text

Optical FM Demodulation by Fibre Bragg Grating by Sotor, J.Z., Antonczak, A.J., Abramski, K.M.

“…In this paper the application of fibre Bragg grating (FBG) as a FM demodulator is presented. Two types of FBG were investigated: with and without athermal…”
Get full text

Diode Pumped Compact Nd:YAG/BiBO Blue Laser at 473 nm by Antonczak, A.J., Matysiak, M., Sotor, J.Z., Abramski, K.M.

“…In this paper we demonstrated blue laser generation at 473 nm in a BiB 3 O 6 crystal at Type I phase matching performed with a diode-pumped Nd:YAG laser. For 1…”
Get full text